VCR Operation Setup VCR Setup Menu Options

The tuner will automatically scan for all available channels in your area and place them in the tuner’s memory.

When AUTO CHANNEL SET is complete, make

5 sure TUNING BAND is set appropriately (TV or CATV) in the TUNING menu.

Remember, TV is for over-the-air antenna recep- tion, and CATV is for cable or wireless connection.

6 Press MENU to return to the TV screen.

Use CH (v/V) on the remote control or CH (v/V)

7 on the front panel to cycle the DVD+VCR through the channels in memory.

TO ADD OR ERASE CHANNELS FROM MEMORY This feature allows you to add or erase channels in memory manually.

1 Use V to choose the CH. ADD/DEL option on the TUNING menu. Use b/B to select a channel to add or erase.

2 Use ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels.

3 Press MENU to return to the TV screen.

VCR Operation Setup (Continued)

VCR Setup Menu Options

1Press MENU to display the MAIN menu.

2 Use v/V to select the SETUP menu, then press

ENTER.

The SETUP menu will appear.

Channel Selection

This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125.

Preparation:

Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown in “Connecting Antenna/Cable TV to DVD+VCR” on page 11.

3 Use v/V to choose the desired option on the SETUP menu, then use b/B to choose the desired setting.

FUNCTION OSD

The DVD+VCR on-screen displays can be turned on or off. Press b/B to set FUNCTION OSD to ON or OFF.

LANGUAGE SELECT

The DVD+VCR on-screen menus can be displayed in English, Spanish, or French.

Press b/B to set LANGUAGE SELECT to ENGLISH, SPAN- ISH or FRENCH.

AUDIO MODE

The DVD+VCR has two separate audio playback systems: 1) High-quality VHS Hi-Fi system, and 2) NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a DVD+VCR that does not have VHS Hi-Fi.

Press b/B to set AUDIO MODE to HI-FI or NORMAL.

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signals is received, the DVD+VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO position. The DVD+VCR will then record a STEREO program when available, and record a mono program IF the program is NOT IN STEREO. For weak STEREO and/or SAP broadcasts, changing the dis- play to mono may give clearer sound.

Press b/B to set BROADCAST TYPE to STEREO, SAP, or MONO.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi- tion, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.

Press b/B to set AUDIO OUTPUT to STEREO, LEFT, or

RIGHT.

4Press MENU when finished.

AUTO CHANNEL PROGRAMMING

1Press MENU to display the MAIN menu.

2 Use v/V to select the TUNING menu, then press

ENTER.

The TUNING menu will appear.

3then use b/B to select TUNER.

Press b/B repeatedly to select TUNER, LINE1 or LINE2.V to choose the SOURCE SELECT option,Press

Use v/V to choose the AUTO CHANNEL	SET option,
4 then use b/B to search for channels.