GoVideo DV1130Q Some channels are, Use CH. ADD/DEL. to restore channels, DVD+VCR is in Timer mode

Page 37

Troubleshooting (Continued)

	Symptom	Cause	Correction

	Some channels are	The skipped channels were deleted with	Use CH. ADD/DEL. to restore channels.
	skipped over when	the CH. ADD/DEL option.	See “Channel Selection” on page 16.
	using CH (3/4)

	Picture and sound of	Antenna or cables are loose.	Tighten connections or replace cable.
	broadcasting channel
	are weak or missing.
	are weak or missing.	Wrong TUNING BAND option is being	Try all TUNING BAND options. See
		Wrong TUNING BAND option is being	Try all TUNING BAND options. See
		used.	“Channel Selection” on page 16 for
			details.

	Camcorder image is not	Camcorder is off.	Turn camcorder on and operate
	shown.		properly.

	Camcorder image via	DVD+VCR SOURCE SELECT is not set	Press INPUT to select LINE input
	A/V input to DVD+VCR	to LINE1 or LINE2.	channel (LINE1 or LINE2).
	is not shown on TV
	screen.
	Timer recording is not	Clock in DVD+VCR is not set to correct	Set clock to correct time. See “Setting
	possible.	time.	the Clock” on page 17.

		Timer has been programmed	Reprogram Timer. See “Timer
		incorrectly.	Recording” on pages 23 and 24.
		indicator does not appear after pro-	Reprogram Timer.
		gramming timer.
	indicator appears	DVD+VCR is in Timer Recording mode.	This is the normal indication that the
	after DVD+VCR is turned		DVD+VCR is in Timer mode.
	off.
	Stereo Audio Record	TV is not Stereo-compatible.	No action is possible.

		Broadcast program is not in stereo for-	No action is possible.
	and/or Playback is not	Broadcast program is not in stereo for-	No action is possible.
	and/or Playback is not	mat.
	present.	mat.

		DVD+VCR A/V Out jacks are not con-	Make A/V connections. Stereo is
		DVD+VCR A/V Out jacks are not con-	Make A/V connections. Stereo is
		nected to TV A/V In jacks.	available only via A/V output from
			DVD+VCR.

		DVD+VCR Audio/Video Out is not	Select AUX or A/V source as TV input.
		selected for viewing at the TV.
		DVD+VCR BROADCAST TYPE mode is	Set BROADCAST TYPE mode to
		set to SAP or MONO.	STEREO. See “VCR Setup Menu
			Options” on page 16.

REFERENCE

Moisture Condensation

Moisture condensation can occur:		In locations where moisture condensation may occur:

•	When the DVD+VCR is moved from a cold place to a	•	Keep the DVD+VCR plugged into an AC power outlet
	warm place.		with POWER On. This will help prevent condensation.
•	Under extremely humid conditions.	•	When condensation has occurred, wait a few hours
			for the DVD+VCR to dry before using it.

Auto Head Cleaners

Whenever a video cassette is inserted into or ejected from your VCR the video head is automatically cleaned. This should mean that additional head cleaning should not be necessary.

However, dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might.

37

Image 37

Contents DV1130Q Regulatory Information FCC Part Safety PrecautionsImportant Safety Instructions Table of Contents Remote Control Operating Range Remote Control Battery InstallationBefore Use Playable DiscsAbout Symbols PrecautionsSelecting the Viewing Source Front Panel Controls REC Front Panel DisplayRemote Control Connections Panel Connections Connecting Antenna/Cable TV toConnections Basic TV Connections How to set the DVD+VCR’s RF output channelRF coaxial connection Audio/Video connectionComponent Video Color Stream connection Video connectionProgressive Scan ColorStream pro connection DVD+VCR Connections Panel OteDigital Multi-channel Sound Accessory Audio/Video A/V Connections toAmplifier Receiver Rear of DVD+VCROn-Screen Menus Setup VCR Operation Setup On-Screen Display OSDMenu Selection Channel Selection VCR Operation Setup VCR Setup Menu OptionsAuto Clock Set VCR Operation Setup Setting the ClockManual Clock Set On-Screen Display DVD Operation Setup General ExplanationOn-screen display operation General Operation DVD Operation Setup Initial SettingsLanguage PictureSound DVD Operation SetupOthers If you forget your 4-digit password Changing the 4-digit passwordParental Control Rating DVDSpecial Effects Playback VCR Operation Normal PlaybackVCR Operation Normal Recording Timer RecordingTo pause recording To record one TV program while watching anotherVCR Operation Checking Erasing Timer Record ProgrammingProgram Priority Press Menu to return to the TV screenChecking the Recording Time Instant Timer RecordingTo Extend the Recording Time Tape speed will appear on the TV screenMTS information is shown on screen when Enter is pressed Multichannel TV Sound Indicator MTSMTS Multi-Channel TV Sound TV screenAdditional Information VCR Operation Tape Counter Memory FeatureDVD Operation Playing DVDs General FeaturesDVD Operation General Features Special DVD Features Insert a disc and close the tray Operation with Audio CD and MP3 DiscPress Return to move to the MP3/JPEG choice menu To stop playback at any other time, press StopMoving to another Track CD MP3 Pause CD MP3Repeat Track/All/Off CD MP3 Search CDMoving to another File Operation with Jpeg Disc Viewing a Jpeg disc JpegStill Picture To flip the pictureProgrammed Playback with Audio CD and MP3 Disc Programmed Playback CD MP3Repeat Programmed Tracks/All/Off Erasing a Track/File from the Program ListChart, find the code corresponding to Controlling the TV with remote controlYour brand of operational TV Buttons used to operate the TVSymptom Cause Correction TroubleshootingDVD+VCR is in Timer mode Use CH. ADD/DEL. to restore channelsAuto Head Cleaners Some channels areLanguage Code Language Code ListCode Country Country Code ListVCR Specifications SpecificationsDVD Specifications GeneralWhat is Covered and How Long Who Provides the Limited WarrantyGoVideo Warranty Administrator Who is Protected