Timer Recording with VIDEO Plus+ System
This system makes programming timer recordings very simple. Most TV guides publish the PlusCode program- ming numbers with their program details.If you want to make a timer recording of a program, you just input the corresponding PlusCode programming number. The date, start, stop and channel settings are made auto- matically. All you have to do is tell the recorder the recording mode and quality, and whether it’s a once- only recording, or a regular recording.
Up to 8 timer programs can be stored in the recorder.
Press VIDEO+.
1 The VIDEO Plus+ menu will appear. Press VIDEO+ again to exit the menu.
VIDEO Plus+
Number
CLEAR Delete | Close |
2enter the PlusCode programming number.
• If you make a mistake before pressing ENTER,Use the number buttons then press ENTER to
press CLEAR repeatedly to delete password numbers one by one then correct it.
To check the programming, the Timer Record menu will appear.
Timer Record |
|
|
|
| SP | 198 min Free | ||||
Media | PR |
| Date | Start Time |
| End Time | Mode |
| PDC | |
DVD | 9 |
| 16/05 Sun | 10:07 |
| 11:00 | SP |
| ON | |
|
|
|
|
|
|
|
|
|
| |
OK | OK C07 | TIMER Timer Rec List | Close |
|
| |||||
You can change the settings as required (Mode, PDC, etc.)
Follow steps
3 (Timer Recording).
Checking Timer Recording Details
Programming can be checked whenever the Recorder is turned on. Press TIMER twice.
•Use v / V to select a timer recording.
•Press ENTER to edit the selected program. Timer Record menu appears.
•Press CLEAR to delete the selected program from the Timer Record List.
Timer Record List
Media PR | Date Start Time | Length | Mode | PDC | Check |
11 | 16/05 Sun 10:12 | 30min | SP | ON | Rec. OK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OK Edit CLEAR Delete | TIMER Timer Rec | Close |
Canceling a Timer Recording
You can clear a timer setting anytime before the record- ing actually starts.
•Use v / V to select a program you want to erase on the Timer Recorder List. If you want to erase the program, press CLEAR.
Stopping a Timer Recording in Progress
After a timer recording has started, you can still cancel the program.
•Press
Timer Recording Troubleshooting
Even though the timer is set, the recorder will not record when:
•There is no disc (or tape) loaded.
•A
•Disc Protect is set to ON in the Setup menu (see page 30).
•Power is turned on. (Please ensure that the set is in Standby mode for Timer recording to activate.)
•There are already 49 titles recorded on the disc.
You cannot enter a timer program when:
•A recording is already underway.
•The time you’re trying to set has already passed.
•There are already 8 timer programs set.
If two or more timer programs overlap:
•The earlier program takes priority.
•When the earlier program finishes, the later program starts.
•If two programs are set to start at exactly the same time, the program entered first takes priority.
If the disc is damaged, the recording may not complete successfully. In this case even though the Check field shows “Rec. OK”, it may not be.
46