USB Mode, To USE the USB Device

and only for your reference. Please see the actual product if necessary.

VSize

Pressing thebutton changes between full screen top half bottom half full screen. This feature is very useful as it magnifies the image making the characters easier to read.

TO USE THE USB DEVICE

ASupported file formats:

t Photo: *.jpg;

t Music: *.mp3 files;

t Movie: *.avi files;

t TEXT: *.txt

VReveal

Pressing the button will reveal hidden text. This

feature is used to reveal information such as answers to Teletext on-line interactive puzzles.

VTime

While in normal TV mode only, pressing the button

will display the teletext time in the top right hand corner for a few seconds.

VFast text coloured buttons

Fast text automatically displays the four most commonly used pages that the broadcaster thinks that you may want to choose next. Press the same coloured button on the remote control as the coloured link at the bottom of the teletext page to go directly to that page.

Note

ODue to the particularity of file cording, some files may be unable to read.

BSupported equipment:

Support the equipment that supports Mass Storage Protocol and whose file system is FAT32, such

as some USB disks, mobile harddisks, and MP3 player. If USB equipment could not be identified due to unsupported file system, please format the equipment to the above-mentioned file system.

CTo achieve smooth playing, ensure the following:

t The file code rate should be lower than 300KB/S; t Due to the limitation of USB signal transmission distance, it is recommended not to use USB patch cord, in case of using the cord, make sure that its

length is not over 1m;

t Use high-speed USB equipment in conformity with USB2.0 full speed Interface Standard; If USB equipment in conformity with USB1.1 full speed Interface Standard is used, the playing may be unsmooth.

VSubcode

Pressing the button by entering its 4-digit number to enter a secondary page.

USB MODE

Note

OThe diagrams in the following section are schematic

When connecting/removing the USB device

APress “SOURCE” on the remote control unit to select USB option.

B Insert USB equipment into corresponding USB interface 2s after starting the system.

C After entering the system menu, press “ / “ on the remote control unit to select the require USB files, press “OK” button to confirm the selection and enter the file list relative to the selection.

D Press“ / “ on the remote control unit to select the required file, press“OK” button to enter the selected file.

P.22	BUSH 1080p Digital LED LCD User Manual Helpline: 0845 604 0105