CONNECT A DVD PLAYER TO YOUR TV
Connect the DVD video outputs (Y, Pb, Pr) with the supplied component adapter and component audio adapter to the COMPONENT (Y, Pb, Pr) IN socket on your TV.
ATurn on the DVD player and insert a DVD.
BPress the source buttom on the remote control to select the source of COMPONENT in your TV .
CRefer to the DVD player user guide for operating instructions.
DVD
PREPARATION OF
YOUR REMOTE
CONTROL
BATTERY INSTALLATION
APlace the remote control face down, then open the cover of the battery compartment.
BInstall two AAA batteries. (The + and - symbol of the battery must match with the marks on the remote).
SCART INPUT
AConnect the scart lead from the external device (DVD player,
supplied SCART adapter to the TV scart socket. | C Close the cover of the battery compartment. |
B C
Press the SOURCE button to select SCART mode.
Press the PLAY button on the external device.
HDMI INPUT
AConnect the cable from the HDMI device to the TV HDMI socket.
BPress the SOURCE button to select HDMI mode.
CRefer to the HDMI device user guide for how to operate.
MOUNT YOUR TV ONTO THE WALL
You can mount your TV onto the wall by using a wall bracket (not supplied). Use M4/M6 machine screws (4 pcs) to screw the TV onto the bracket (not supplied).
BATTERY CAUTION
Confirm there is no object between the remote control and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the signal sent by the remote control. In this situation turn the TV set to avoid the direct light source.
Do not put the remote control in direct heat or in a damp place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery types. Install the batteries at the correct polarities. Do not use rechargeable batteries. If your TV is to be stored
P.08 | BUSH 1080p Digital LED LCD User Manual Helpline: 0845 604 0105 |