LG Electronics W2600V manual Troubleshooting, Is the power cord of the display connected?

Page 24

Troubleshooting

Check the following before calling for service.

No image appears

Is the power cord of the display connected?

Is the power indicator light on?

Is the power on and the power indicator blue or green?

Is the power indicator amber?

Do you see an "OUT OF RANGE" message on the screen?

Do you see a "CHECK SIGNAL CABLE" message on the screen?

Check and see if the power cord is connected properly to the power outlet.

Touch the Power button.

Adjust the brightness and the contrast.

If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.

Try to turn on the PC.

This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.

This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.

Do you see a "OSD LOCKED" message on the screen?

Do you see “OSD LOCKED” when you push MENU button?

You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message

“OSD UNLOCKED” will appear.

23

Image 24
Contents W2600V Important Precautions On SafetyOn Installation On Cleaning On RepackingOn Disposal Connecting the Display Connecting the stand base or Removing the stand baseScrew Turn the screw by using the screw handle Positioning your display Height Range maximum 3.94 inches 100.0mmUsing the Computer Power Cord Signal CableTouch the Source button at the front side of the monitor Connecting the USBUniversal Serial Bus Cable Power ConsumptionTo arrange the cables Control Panel Functions Front Panel ControlsButton Menu ButtonWhen 2 sets of computers are Auto Image AdjustmentSource Hot key AUTO/SETOn Screen Display OSD Control Adjustment Screen AdjustmentOn Screen DisplayOSD Selection and Adjustment Main menu Sub-menu ReferenceIcons To select the adjust the resolution To select the image size of the screenNormal Gaussian BlurSepia MonochromePreset Brightness Contrast GammaBlack LevelPhase VerticalClock SharpnessAdjust Restore all factory default settings exceptSub-menu LanguageMenu Exit Top left Bottom left Bottom right Top rightMovie Select this when you are watching a video or movie Game Select this when you are playing a gameSports Select this when you watching general sports UserTroubleshooting Is the power cord of the display connected?Do you see OSD Locked when you push Menu button? Display image is incorrect Screen blinks Screen color is mono or abnormalSpecifications Separate SyncRGB Analog 0.7 Vp-p/ 75 ohm, Digital With StandUSB Indicator Hdmi Vedio InputInstalling the Wall mount plate Digitally yours
Related manuals
Manual 32 pages 29.44 Kb