LG Electronics W2600V manual Screen blinks, Screen color is mono or abnormal

Page 26

Troubleshooting

Display image is incorrect

The screen color is mono or abnormal.

The screen blinks.

Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.

Make sure the video card is properly inserted in the slot.

Set the color setting higher than 24 bits (true color) at Control Panel - Settings.

Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

Have you installed the display driver?

Have you installed the display driver?

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com.

Make sure to check if the video card supports Plug&Play function.

25

Image 26
Contents W2600V On Installation Important PrecautionsOn Safety On Disposal On CleaningOn Repacking Connecting the Display Connecting the stand base or Removing the stand baseScrew Turn the screw by using the screw handle Positioning your display Height Range maximum 3.94 inches 100.0mmUsing the Computer Power Cord Signal CableTouch the Source button at the front side of the monitor Connecting the USBUniversal Serial Bus Cable Power ConsumptionTo arrange the cables Button Control Panel FunctionsFront Panel Controls Menu ButtonSource Hot key When 2 sets of computers areAuto Image Adjustment AUTO/SETOn Screen Display OSD Control Adjustment Screen AdjustmentOn Screen DisplayOSD Selection and Adjustment Main menu Sub-menu ReferenceIcons To select the adjust the resolution To select the image size of the screenSepia NormalGaussian Blur MonochromeBlack PresetBrightness Contrast Gamma LevelClock PhaseVertical SharpnessSub-menu AdjustRestore all factory default settings except LanguageMenu Exit Top left Bottom left Bottom right Top rightMovie Select this when you are watching a video or movie Game Select this when you are playing a gameSports Select this when you watching general sports UserDo you see OSD Locked when you push Menu button? TroubleshootingIs the power cord of the display connected? Display image is incorrect Screen blinks Screen color is mono or abnormalRGB Analog 0.7 Vp-p/ 75 ohm, Digital SpecificationsSeparate Sync With StandUSB Indicator Hdmi Vedio InputInstalling the Wall mount plate Digitally yours
Related manuals
Manual 32 pages 29.44 Kb