LG Electronics W2600V manual Using the Computer, Power Cord Signal Cable

Page 7

Connecting the Display

Using the Computer

1. Make sure to turn off the computer and product.

Connect signal input cable 1 and power cord 2 in order, then tighten the screw of the signal cable.

AConnect DVI(Digital signal) Cable

BConnect D-sub(Analog signal) Cable (PC)

CConnect D-sub(Analog signal) Cable (Mac)

DConnect HDMI Cable

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product.

Power Cord 2

1

Signal Cable

Varies according to model.

Wall-outlet type

AV equipment

(Set-Top Box,

DVD, Video,

Video Game

Console)

*HDMI is optimized on the AV equipment.

PC

MAC

PC

DVI-D(This feature is not available in all countries.)

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

6

Image 7

Contents W2600V On Safety Important PrecautionsOn Installation On Repacking On CleaningOn Disposal Connecting the stand base or Removing the stand base Connecting the DisplayScrew Turn the screw by using the screw handle Height Range maximum 3.94 inches 100.0mm Positioning your displayPower Cord Signal Cable Using the ComputerTouch the Source button at the front side of the monitor Power Consumption Connecting the USBUniversal Serial Bus CableTo arrange the cables Menu Button Control Panel FunctionsFront Panel Controls ButtonAUTO/SET When 2 sets of computers areAuto Image Adjustment Source Hot keyScreen Adjustment On Screen Display OSD Control AdjustmentMain menu Sub-menu Reference On Screen DisplayOSD Selection and AdjustmentIcons To select the image size of the screen To select the adjust the resolutionMonochrome NormalGaussian Blur SepiaLevel PresetBrightness Contrast Gamma BlackSharpness PhaseVertical ClockLanguage AdjustRestore all factory default settings except Sub-menuTop left Bottom left Bottom right Top right Menu ExitGame Select this when you are playing a game Movie Select this when you are watching a video or movieUser Sports Select this when you watching general sportsIs the power cord of the display connected? TroubleshootingDo you see OSD Locked when you push Menu button? Display image is incorrect Screen color is mono or abnormal Screen blinksWith Stand SpecificationsSeparate Sync RGB Analog 0.7 Vp-p/ 75 ohm, DigitalUSB Hdmi Vedio Input IndicatorInstalling the Wall mount plate Digitally yours

Related manuals

Manual 32 pages 29.44 Kb