BenQ H200:A user manual Antennas, Outdoor Antenna Connection

Page 14

BENQ Corporation

ANTENNAS

The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various antenna systems. 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without

tools (not supplied).

2. A 300-ohm system is a flat “twin-lead” cable that can be attached to a 75-ohm terminal through a 300-75-ohm

adapter (not supplied).

OUTDOOR ANTENNA CONNECTION

Use one of the following two diagrams if you connect an outdoor antenna.

A:Using a VHF/UHF combination outdoor antenna.

B:Using separate VHF and/or UHF outdoor antennas.

Connect the outdoor antenna cable lead-in to the ANT. terminal on the rear of the TV set.

A. Combination VHF/UHF Antenna

	300/75-ohm
VHF/UHF	adapter
antenna	(not supplied)
or
	300-ohm
	twin-lead
75-ohm
coaxial cable

VHF/UHF antenna

To antenna input terminal

B. Separate VHF and/or

UHF Antennas

VHF UHF antenna antenna

300-OHM twin-lead

Combiner

300-OHM(not supplied) twin-lead

IN OUT

or 75-ohm coaxial cable

Antenna cable (not supplied)

12 Basic information and preparations

Image 14

Contents Table of Contents Set Up Utility function Set Up Closed Caption FCC Caution FCC NoticeLCD TV H200A Class B digital device FCCImportant Safety Instructions Safety precautions Benq Corporation Important Information AC Power Supply Cord Safety TipsBefore Setting Up Be sure to disconnect all cables before moving the LCD TV If problems occur during useWhen using the LCD TV H200 Features and Benefits IntroductionSupplied Accessories Batteries for the Remote Control Using the Remote ControlPrecaution on battery use PreparationCable TV Catv Connection Power ConnectionAntenna Connection USA Ntsc system Antennas Outdoor Antenna ConnectionFront Control Panel Front and Rear Control OptionsMain unit Front view Main unit Rear view Removing the Back CoverListening with Headphones ConnectionsVideo Signal Connection How to connect the AV Input TerminalsComposite Video Signal Connection RCA Component Y Cb/Pb Cr/Pr Signal ConnectionHow to connect the PC Input Terminals RGB signal min D-SUB 15 pin connectionRemote Control Basic Operation Switching TV/VIDEO/PC PC/AV/Y Pb Pr/Y Cb Cr/TV ModesOperation Turning On/Off and StandbySound Volume Adjustment Changing the ChannelsTo select a 3-digit channel number e.g., Channel Auto FunctionChannel Function AutoSelecting the On-Screen Menu Language How to use the OSD menuFunction Operation Press Menu or MenuAdjusting the Sleep Timer Settings SleepAspect Controls Setting the Aspect on the Menu screenMode Explanation Freeze OSD Menu AdjustmentPicture Adjustments Dpms PC ModeVideo Mode Advance Adjustments AUTO, PAL-M, PAL-N Video advance options adjustment Video and TV mode onlyUser Color Define Sound Adjustment in OSD PC,Video and TV mode WOWBacklight Utility Setting PC and Video ModeOSD Function Setting PC,Video and TV mode PC,Video and TV Signal Information How to Use Hot Key Function for Adjustment InfoMTS Utility Setting TV mode onlyUtility Language B PALCatv IRC TV/CATVAIR, Catv STD, Catv HRC Scan TV/CATVHRC, Catv IRC Set Up Utility functionTV system with Closed Caption and V-chip USA only Setting Closed Caption Set Up Closed CaptionSet Up V-CHIP Setting V-CHIPTV Parental Guidelines NC-17 no ONE 17 and Under AdmittedExample RatingAdjust V-Chip setting First Time SET UP V-CHIPChanging or Clearing the Secret Number ChipTV Guidelines Password mismatch Troubleshooting Symptoms Possible CausesAntenna Specifications VideoFront Acrylic Sheet Cleaning Resolution Horizontal Vertical Dot Clock Remark Supported Operating ModesDimensional Drawings