Safety Tips, Before Setting Up, AC Power Supply Cord

BENQ Corporation

SAFETY TIPS

Please read and follow the safety tips listed below to ensure the equipment is free from damage, and to ensure that no injury will occur as a result of improper use.

Do not insert any object, especially metal or liquids, into the TV.

Do not place any objects containing water or any other liquid on top of the TV.

Do not place the unit in direct sunlight, near heaters or in extremely dusty or humid locations. Do not install this system outdoors or otherwise expose it to the elements.

Do not place heavy objects on top of the TV.

If the power cord is damaged or frayed in any way, electrical shock and/or fire may result.

Please do not place objects on the power cord, and keep the cord away from heat-emitting devices. Should the power cord become damaged in any way, please contact your dealer for a replacement cord.

Do not remove the cover of the TV for any reason. If any problems arise with the unit, please contact your dealer for service. Removing the covers will void the warranty.

WARNING

Before Setting Up

Do not place the TV on sloped or unstable surfaces.

The TV may fall or tip over.

Do not place any objects on top of the TV.

If water spills onto the H200 or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the H200, please consult an Authorized Dealer.

Do not cover the ventilation holes.

Doing so may cause the H200 to overheat, which can cause fire or damage to the set.

AC Power Supply Cord

The H200 is designed to operate on 100~240 V AC, 50/60 Hz.

Securely insert the power cord plug as far as it will go.

If the plug is not fully inserted; heat may be generated which could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used.

Do not handle the power cord plug with wet hands.

Doing so may cause electric shocks.

Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable.

Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the power cable. Doing so may cause damage to the power cable, which can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center

If the H200 is not in use for a long period of time, unplug the power cord from the wall outlet.

6 Safety precautions