User’s manual
FRONT AND REAR CONTROL OPTIONS
Main unit (Front view)
Channel (
) / (
)
Speaker
Input Remote Control Sensor Window
Power indicatior
Power
Menu
Speaker
Volume (+) /
POWER indicator
A BLUE indicator lights when the power is on. The light is off when in the standby mode (the indicator will flash when the set is in power saving mode.).
To change the vertical angle of the LCD TV set,
tilt the screen up to 12 degrees forward. The TV set can also be rotated 60 degrees horizontally. Please adjust the angle so that the TV set can be watched most comfortably.
Front Control Panel
1. Power:
The H200 must first be plugged into the wall outlet. Press this button to turn the H200 ON from STANDBY mode. Press it again to turn the set OFF to STANDBY mode.
2. Menu:
Press this button to display the OSD main page. Each time you press Menu button, the OSD main page will display in right sequence
Pressing the button for more then 1 sec. to select the OSD main page in left sequence.
3. Volume (+)/(-):
Press the Volume Up” +” or Down”
In OSD Menu, press these buttons to adjust the value or setting of each item and press Volume (+) as an “Execute”, “ ” or “ENTER” action.
4. Channel ( )/( ):
Press these two buttons to directly adjust the TV channel.
In OSD Menu, press these buttons to choose the OSD items.
5. Input:
Press this button to open and select the TV/Video/PC input source.
If the OSD menu is displayed, press this button for 1 sec. to exit the OSD menu.
Note:
Power, Channel ( )/( ), Volume
Front and rear control options 13