Nikon COOLPIXL610BLK manual Troubleshooting, Power, Display, Settings Issues, Not respond, 98, E81

Troubleshooting

If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative.

Power, Display, Settings Issues

	Problem		Cause/Solution	A
		• Wait for recording to end.		–
		• If the problem persists, turn the camera off.		14, 15, 23,
			If the camera does not turn off, remove and reinsert	E95
	The camera is on but does		the battery or batteries or, if you are using an AC
			adapter, disconnect and reconnect the AC adapter.
	not respond.
			Note that although any data currently being
			recorded will be lost, data that have already been
			recorded will not be affected by removing or
			disconnecting the power source.
		•	Battery is exhausted.	22
	Camera turns off without	•	Camera has turned off automatically to save power.	98, E81
	warning.	•	The camera and batteries have become too cold	F4
			and cannot operate properly.
Technical		•	Camera is off.	23
		•	switch, the shutter-release button, A button,	22
			Battery is exhausted.
Notes		• Standby mode for saving power: press the power		2, 23
	Monitor is blank.	•	c button, or b (e movie-record) button.
			The flash lamp flashes while the flash is charging.	55
and		•	Wait for the flash to charge.
			Camera and computer are connected via USB	80, 85
Index		•	Camera and TV are connected via audio/video	80, E27
			cable.
			cable or HDMI cable.

F8