Nikon 6MNA8611-02 Hide info is selected for Photo info, Select Show info, Support Print date

Problem	Cause/Solution	A
Monitor is hard to read.	• Adjust monitor brightness.	98, E73
	• Monitor is dirty. Clean monitor.	F6
	• If camera clock has not been set, “Date not set”
	indicator flashes when shooting images and
	recording movies. Images and movies saved before
Date and time of recording	clock is set are dated “00/00/0000 00:00” or “01/01/	18, 98,
	2012 00:00” respectively. Set the correct time and
are not correct.		E70
	date using Time zone and date in the setup
	menu.
	• Check camera clock regularly against more
	accurate timepieces and reset as required.
No indicators displayed in	Hide info is selected for Photo info.	98, E73
monitor.	Select Show info.
Print date not available.	Time zone and date in the setup menu has not	18, 98,
	been set.	E70
Date not imprinted on	• The current shooting mode is one that does not
images even when Print	support Print date.	98, E75
date is enabled.	• The date cannot be imprinted on movies.
Screen for setting time zone
and date is displayed when	Clock battery is exhausted; all settings were restored	18, 21	Technical
camera is turned on.	to their default values.
Camera settings reset.
	The camera may become hot when recording movies		Notes
Camera becomes hot.	or uploading images from an Eye-Fi card for an	–
	extended period of time, or when the camera is used		and
	in a hot area; this is not a malfunction.
			Index

F9