Selecting and Adjusting the Screen
How to adjust the OSD (On Screen Display) screen
Pops up | Move where | Select a | Move where | Select a | Adjust the status | Save | Exit from the | |
the menu | you want to | menu icon | you want to | menu icon | adjustment | menu screen. | ||
| ||||||||
screen | adjust |
| adjust |
|
|
|
|
•Use the remote control to adjust the OSD screen.
1Press the MENU Button, then the main menu of the OSD appears.
2To access a control, use the 
Buttons.
3When the icon you want becomes highlighted, press the SET Button.
4Use the 
Buttons to adjust the item to the desired level.
5Accept the changes by pressing the SET Button.
6Exit the OSD by pressing the EXIT Button.
How to adjust the screen automatically
You need to adjust the screen display when connecting the product to a new computer or changing the mode. Refer to the following section to set an optimal product screen.
Press the AUTO/SET button (AUTO button in a remote Control) in the PC analog signal. Then, an optimal screen status will be selected that fits into the current mode.
If adjustment is not satisfactory, you need to adjust screen position, clock and phase in the OSD menu.
[When Full HD Mode is active and 1920 X1080 is selected]
14