LG Electronics M5201Cs Adjusting Screen CLOCK/PHASE and Position, Auto-config, Phase, XGA Mode

Selecting and Adjusting the Screen

Adjusting Screen CLOCK/PHASE and Position

Auto-config.

(RGB PC input only)

Manual- config.

Auto config.

Manual config.

XGA Mode

ARC

Reset

This button is for the automatic adjustment of the screen position, clock and phase. This function is suitable for analogue signal input only.

If the picture isn't clear after auto adjustment and characters are still trembling, adjust the picture phase manually.

* Phase, Clock function are not available in RGB DTV, Component, HDMI/DVI DTV.)

Clock	To minimize any vertical bars or stripes visible on the screen
	background. The horizontal screen size will also change. This function
	is suitable for analogue signal input only
Phase	To adjust the focus of the display. This item allows you to remove any
	horizontal noise and clear or sharpen the image of characters. This
	function is suitable for analogue signal input only.

H-PositionMoving the screen position horizontally.

V-PositionMoving the screen position vertically.

XGA Mode

(RGB-PC only).

For more improved or better picture quality, select the same mode corresponding to computer resolution.

Auto config.
Manual config.	1024x768
XGA Mode
	1280x768
ARC
	1360x768
Reset
	1366x768

23