LG Electronics 60PA550C, 60PA6500 System Requirements, Removing the Pentouch Program, Windows

PENTOUCH 35

Step of using the Pentouch Program Installing the Pentouch Program

Follow the steps below to use the Pentouch function.

1Check the system requirements before installation.

2Install the Pentouch program from the installation CD.

3Pair the pen and the dongle.

4Connect the PC and the TV.

5Configure the PC screen.

6Activate the Pentouch mode on the TV.

7Start the Pentouch program.

System Requirements

Make sure that the program are installed properly to allow proper operation of the touch pen.

Supported Operating System

Windows XP	32 bit
Windows Vista,	32 bit
Windows 7	64 bit

(Windows 7 Starter Edition is not supported.)

Recommended System Requirements for Pentouch

yyCPU: Dual-Core 2GHz or better

yyMemory: 1GB or more

yyHDD: 500MB or more

yyDisplay: Graphics card with 1024 x 768 via an RGB or HDMI output port

yyWindows 7 is recommend due to its support of multi-touch.

NOTE

yyYou must log in as an administrator to install or remove the program.

yyMake sure to install the program found on the CD provided.

yyYou can also download this program from the LG Electronics website.

yyMake sure to close all running applications before installing the program.

yyRemove old version of the Pentouch program installed on your PC before re-installing or installing new version.

Follow the steps described in this manual to install the program.

1Prepare your computer and start it.

2After the computer starts, insert the CD provided. The installation screen appears automatically.

(If the installation screen is not displayed automatically, access My computer and then click LG and index.htm to view the installation screen.)

3Click [Install the Pentouch Program] in the installation window.

The default folder is used for installation. A window appears to indicate that the installation was completed successfully.

4In Windows XP, the [Found New Hardware Wizard] installs your program automatically.

5Restart your computer after the installation.

NOTE

yyDisconnect the USB dongle first to install the program.

Removing the Pentouch Program

If there is a problem with the Pentouch program or an error occurs while using the program, follow the steps below to remove the program, and then reinstall them.

1On your computer, select [Start] → [Control Panel] → [Add/Remove Programs] to remove the Pentouch program.

-The installed Pentouch program: LG Pentouch

TV

2Click [Yes]. A window appears telling you that the program has been removed.

3Please reboot your PC after removing the program.

ENGLISH