LG Electronics 42LN5700, 60LN5750, 60LN5700 Magic Remote Control Functions, Voice recognition

ENGLISH

30MAGIC REMOTE CONTROL FUNCTIONS

MAGIC REMOTE CONTROL FUNCTIONS

When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.

CAUTION

yyDo not mix old and new batteries, as this may damage the remote control.

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

For LN5750 series

	Wheel (OK)		Pointer (RF transmitter)
Selects menus or options	and confirms
	your input.
Scrolls through the saved channels.
If you press the navigation button while					(POWER)
moving the pointer on the screen, the
pointer disappears, and the Magic remote					Turns the TV on or off.
control works as a regular remote control.
To display the pointer again, shake the					Navigation buttons (up/down/left/right)
Magic remote control from side to side.
					Scrolls through menus or options.
	BACK				SMART
Returns to the previous screen.		BACK		SMART	Accesses the Smart Home menu.

Voice recognition

-This is a beta version and only available in selected functions for supported models.

-Network connection is required to use the voice recognition function.

1.Press the Voice recognition button.

2.Speak slowly and precisely. When a voice is recognized, the processing message appears on the screen.

•Use the magic remote control no further than 10 cm from your face.

Sees user-guide.

/Q.MENU /Q.MENU

Accesses the Universal Control.

Accesses the quick menu.

VOL	CH
	VOL
	Adjusts the volume level.
	CH
	Scrolls through the saved
	channels.
	(MUTE)
	Mutes all sounds.