MAGIC REMOTE CONTROL FUNCTIONS 31
Registering Magic Remote Control
The Magic Remote Control operates by pairing with your TV.
Once you purchased the TV, please register the Magic remote control as follows;
How to register the Magic Remote Control
To register automatically, turn the TV on and press the 
Wheel (OK). When registration is completed, the completion message appears on the screen.
If registration fails, turn the TV off and back
(Wheel) on, then press the 
Wheel (OK) to
complete registration.
1 2
i
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 |
| |||||
|
|
|
|
|
|
|
| |
|
| If you press |
|
|
| Wheel (OK) on the Magic remote | ||
|
|
|
| |||||
1 | control, the screen above opens. | |||||||
|
| It shows information about the current program | ||||||
|
| and screen. | ||||||
How to Re-register the Magic Remote Control
2
Pressing this button will display number
keypad which you can select channel number.
1 | Press and hold the | BACK and |
| SMART buttons together for 5 seconds | |
BACK | to reset, then register it by following “How | |
| to register the Magic remote control” | |
| above. |
|
2 | To | |
SMART | press and hold the | BACK button for 5 |
| seconds toward the TV. | |
How to use Magic Remote Control
1 You can move the pointer by moving the
remote up and down or left and right.
»»If the pointer does not work properly, wait 10 seconds and then try again.
2 If the pointer disappears, move the remote control slightly to left or right. It will then automatically appear on the screen.
»»If the pointer has not been used for a certain period of time, it will disappear.
3 You can select My Apps Menu.
Precautions to Take when Using the Magic Remote Control
yyUse the Magic remote control within the maximum communication distance (10 m, 32.8ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure.
yyA communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic remote control.
yyThe Magic remote control may be damaged or may malfunction if it is dropped or receives a heavy impact.
yyTake care not to bump into nearby furniture or other people when using the Magic remote control.
yyManufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric wave interference.
yyIt is recommended that an Access Point (AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m (3.28 ft), the Magic remote control may not perform as expected due to frequency interference.