LG Electronics 42LN5750 Volume Mute Command k e, Aspect Ratio Command k c Main Picture Size

Page 47

 

 

 

 

 

 

 

EXTERNAL CONTROL DEVICE SETUP 7

* Commands may work differently depending on model and signal.

 

01. Power (Command: k a)

* In case of video mute on only, TV will display On

►►To control Power Off of the set.

Screen Display(OSD). But, in case of Screen mute

on, TV will not display OSD.

 

 

 

 

 

 

 

Transmission[k][a][ ][Set ID][ ][Data][Cr]

 

 

 

 

 

 

 

 

Data 00 : Power Off

04. Volume Mute (Command: k e)

 

 

 

 

 

 

 

Ack [a][ ][Set ID][ ][OK/NG][Data][x]

 

 

 

 

 

 

►►To control volume mute on/off.

►►To Show Power On. (Works TV is On Only)

You can also adjust mute using the MUTE button

 

Transmission [k][a][ ][Set ID][ ][FF][Cr]

 

on remote control.

 

 

 

 

 

 

 

Ack [a][ ][Set ID][ ][OK][01][x]

 

Transmission [k][e][ ][Set ID][ ][Data][Cr]

* Similarly, if other functions transmit ‘FF’ data

Data 00 : Volume mute on (Volume off)

 

01 : Volume mute off (Volume on)

based on this format, Acknowledgement feedback

 

 

 

 

 

 

presents status about each function.

 

Ack [e][ ][Set ID][ ][OK/NG][Data][x]

 

ENGLISH

02.Aspect Ratio (Command: k c) (Main Picture Size)

►►To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01 : Normal screen

07 : 14:9

 

(4:3)

(Europe, Colombia, Mid-East,

02

: Wide screen

Asia except South Korea and

 

(16:9)

Japan)

04

: Zoom

09 : * Just Scan

05

: Zoom 2

0B : Full Wide

(Latin America

(Europe, Colombia, Mid-

except Colombia

East, Asia except South

Only)

Korea and Japan)

06

: Set by Program/ 10 to 1F : Cinema Zoom 1

 

Original

to 16

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

*Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.

*In DTV/HDMI/Component mode (high-definition), Just Scan is available.

*Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially.

03.Screen Mute (Command: k d) ►►To select screen mute on/off.

Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00 : Screen mute off (Picture on) Video mute off

01 : Screen mute on (Picture off)

10 : Video mute on

Ack [d][ ][Set ID][ ][OK/NG][Data][x]

05. Volume Control (Command: k f)

►►To adjust volume.

You can also adjust volume with the volume buttons on remote control.

Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

Ack [f][ ][Set ID][ ][OK/NG][Data][x]

06. Contrast (Command: k g)

►►To adjust screen contrast.

You can also adjust contrast in the PICTURE menu.

Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

07. Brightness (Command: k h)

►►To adjust screen brightness.

You can also adjust brightness in the PICTURE menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

Ack [h][ ][Set ID][ ][OK/NG][Data][x]

08. Color/Colour (Command: k i)

►►To adjust the screen Color(Colour).

You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [i][ ][Set ID][ ][OK/NG][Data][x]

Page 46 Page 48
Image 47
Page 46 Page 48
Contents LED TV English Important Safety InstructionsEnglish YyVentilation YyDisconnecting the Main PowerYyGrounding YyMovingYyGenerated Sound Preventing Image burn or Burn-in on your TVScreen YyDot Defect For USA and CanadaOpen Source Software Notice LicensesTable of Contents Unpacking Installation ProcedureAssembling and Preparing Desk-mount Screw Cable Holder Sound Bar See p Tag On Optional ExtrasParts and Buttons Power IndicatorRemote control Sensor Intelligent Sensor Lifting and moving the TV Attaching the stand Setting up the TVMounting on a table Using the Kensington security system optionalTidying cables Mounting on a wall Making Connections Connecting to an antenna or cableHdmi is the best way to connect a device Connecting to a HD receiver, DVD Player, or VCRHdmi Connection DVI to Hdmi Connection Connecting to a mobile phone Component Connection Yellow White RED Composite ConnectionChoose method a or B to make connection Connecting to a PCHdmi Connection DVI or Hdmi Connection Method B DVI to Hdmi Connection Digital Optical Audio Connection Connecting to an Audio SystemConnecting to a Sound Bar USB Hub Connecting HeadphonesConnecting a USB Drive Info Remote ControlCH a Voice recognition Magic Remote Control FunctionsHow to register the Magic Remote Control Registering Magic Remote ControlHow to use Magic Remote Control Precautions to Take when Using the Magic Remote ControlTurning the TV on for the first time Watching TVUser Guide Using the User GuideTelevision System SpecificationsDimensions Width Hdmi PC supported mode Hdmi DTV supported modeComponent supported mode Component port connecting informationBluetooth module BM-LDS401 specification External Control Device SetupWireless LAN module WN8122E1 specification Power cord MaintenanceTroubleshooting Cleaning Your TVChild Safety Register your product Online CanadaExternal Control Device Setup Power This feature is not available for all modelsVolume + VolumeUSB Type External Control Device SetupSub RS-232CSerial port Communication Parameters Set ID C8 Step 0F Step Carriage Return Ascii code ‘0x0D’Space Ascii code ‘0x20’ Contrast Command k g Volume Mute Command k eAspect Ratio Command k c Main Picture Size Volume Control Command k fOSD Select Command k l Tint Command k jColorColour Temperature Command x u Sharpness Command k kFor Japan Model For South Korea, North/Latin America exceptColombia Model Input select Command x b Main Picture Input ChannelProgramme Add/DelSkip Command m bControl Back Light Command m g Control Panel Light Command m g For Plasma TVDon’t care DCommand x t only 3D models Depending on modelExtended 3DCommand x v only 3D models Depending on model
Top Page Image Contents