LG Electronics 32LT670H, 55LS675H, 42LT670H, 37LT670H, 26LT670H setup guide USB Configuration

Page 13

Automated Installation Routine Wizard (Cont.)

USB Configuration

This section describes how to configure a TV for FTG Mode via CPU operation using an FTG Configuration (.tlx) file loaded on a USB memory device.

Note: Refer to the Free-To-Guest (FTG) File Manager User Guide and/or “Creating an FTG Configuration File using the FTG File Manager” on pages 39 to 40 for information on creating an FTG Configuration (.tlx) file.

Note: This procedure assumes that the FTG Configuration file contains an FTG Channel Map. If not, any Installer Menu and/or TV setup menu settings contained in the file will be transferred to the TV (as with typical cloning); however, the TV will remain in Pass-through Mode and will not be configured for FTG Mode via CPU.

1.Plug the USB memory device that contains the FTG Configuration (.tlx) file into the Target LT670H or LS675H TV USB IN port.

2.Use the Up/Down arrow keys on the Installer Remote

to select/highlight USB Configuration from the Automated Installation Routine Wizard Welcome screen. Then, press OK.

3.In the Accessing USB Storage Device window, use the Up/ Down arrow keys to select the FTG Configuration file you wish to use to configure this TV, and then press OK.

The TV will show configuration progress in a new window. Do NOT remove the USB device until configuration is complete. When the configuration is complete, the TV will briefly display a “Complete” window and then exit the Automated Installation Routine Wizard.

4.Remove the USB memory device, and verify that the FTG Configuration is resident on the Target TV.

The Target TV CPU is now in FTG Mode.

Note: After the configuration process is complete, the TV tunes according to the Start Channel setting in the Installer Menu. If a Start Channel is specified, the TV will tune to that channel; otherwise, the TV will tune to the lowest logical channel in the FTG Channel Map.

Accessing USB Storage Device

Move

OK

Prev.

Please select configuration file (*.tlx)

xxLT670H-UA00005.TLX

USB Configuration

Configuring TV

Please wait...

95%

 

 

 

 

Warning - Do not remove the USB device during this process

206-4213

13

Image 13
Contents Copyright 2013 LG Electronics U.S.A., Inc 206-4213 Rev FFor Customer Support/Service, please call­ Overloading Power CordGrounding Disconnect DeviceOutdoor Antenna Grounding CleaningAntenna Grounding According to NEC, ANSI/NFPA Transporting ProductTable of Contents Setup Checklist Commercial Mode OverviewPass-through Mode External MPI Control Installer MenuRemote Management in FTG Mode FTG ModeProCentric Operation ProCentric TV Interactive Menu FeaturesProCentric Interactive Menu Navigation ProCentric Setup ProCentric Auto Configuration Automated Installation Routine Wizard50% ProCentric Manual ConfigurationUSB Configuration Clonable TV Setup Menu Features Custom Master TV SetupBefore You Begin Cloning MethodsSet Installer Menu items Custom Master TV Setup ProcedureSet up TV features Turn on the TVChannel Optional Run Auto TuningRecommended Lock the channel lineup Verify the TV setupAccessing the Installer Menu Installer MenuAcronym Description Exiting the Installer Menu and Activating Updates Using the Installer MenuNavigation within the Installer Menu Changing Installer Menu SettingsBrief Description of Function and Comments Installer Menu Items 000 throughRear RGB EN Installer Menu Items 078 throughInstaller Sequence Detailed Descriptions of Installer Menu ItemsMute Disable Feature Level Sleep TimerHDMI1 Enable Caption LockHDMI3 Enable HDMI2 EnableProcentric Atsc Tune ModeBack Lighting Atsc BandData Channel Power SavingsPC RF Wake HR PC RF Wake MNTo perform channel editing/labeling Channel Icons / Custom Text Labels 2-5-4 + Menu ModeBefore you begin cloning Cloning OverviewLearn Setup from Master TV USB Cloning ProceduresUSB Cloning Notes Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL TLL-1100A Cloning Notes Clone Programmer Cloning ProceduresTLL-1100A Clone Programmer MPIOptional Set the Clock LT2002 Clone Programmer LT2002 Cloning NotesClone Programmer Cloning Procedures FTG Mode via CPU or EBL FTG Mode of Operation OverviewFTG Mode via CPU FTG Mode via EBLTV Setup Menus Determining the TV Operating ModeFunction Menu FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning FTG Configuration from a TV Run Auto Tuning Channel Search Optional Manual Configuration / TV SetupLT670H Jack Panel FTG Mode via EBLLS675H Jack Panel FTG File Manager Utilities Overview FTG Configuration ListFTG File Manager Main Screen CLEAR/SAVEPrint MAP FTG Channel Map Configuration UtilityFTG Channel Map Editor UpdateADD ExitConfiguration Settings FTG Installer Menu Configuration UtilityRemote Jack Pack Setup Remote Jack Pack / TV Connections & SetupTV Connections RGB in PCUpgrading TV/PTC Software Checking the Software VersionsDownloading a Splash Screen Image Splash Screen Image File Guidelines31.3 Reference Power Consumption SettingsEnable Reference TV Aux Input ConfigurationTV Standby State TV Power On State Reference b-LAN Setup & Overview001 Default Off PowerPriority Video Audio Reference RJP Model List & Input Auto-sensing HierarchyInstaller Menu Item 117 Fact Default Reference Restoring Factory Defaults on the TVsAdditional FTG Mode via CPU Options Additional FTG Mode via EBL OptionsReference TV Zone Restrictions Side Jack Panel Reference LT670H Rear and Side Jack PanelsAudio in RGB/DVI Audio connection for RGB or DVI device Reference LS675H Rear and Side Jack PanelsReference External Speaker Setup Power Reference Installer Remote Control Typical Key FunctionsGeneral Troubleshooting TroubleshootingController Quick Check Troubleshooting Flow ChartFTG Operation Troubleshooting Commercial Mode Check / FTG Operation TroubleshootingSymptom Possible Causes Solutions Reset Clone Programmer After Static Shock Clone Programmer TroubleshootingSymptom Possible Causes Possible Solutions Clone ProgrammerPTC Glossary of TermsCPU EBLDocument Revision History Document Revision History / Open Source Software NoticeOpen Source Software Notice Date DescriptionFor Customer Support/Service, please call­
Related manuals
Manual 68 pages 10.58 Kb Manual 20 pages 9.41 Kb Manual 66 pages 62.39 Kb Manual 40 pages 22.94 Kb

37LT670H, 26LT670H, 42LT670H, 55LS675H, 32LT670H specifications

LG Electronics has long been a leader in the television market, and its LT670H series exemplifies the company's commitment to innovation and quality. This series includes models in various sizes: 42LT670H, 26LT670H, 32LT670H, and 37LT670H, catering to different consumer preferences and space requirements.

One of the hallmark features of the LT670H series is its high-definition display. All models in this lineup support resolutions that deliver sharp and vibrant images, ensuring a superior viewing experience. With their sleek and modern design, these televisions not only perform well but also enhance the aesthetics of any room.

LG's commitment to technology is evident in the incorporation of their renowned Triple XD Engine. This advanced picture processing technology enhances color accuracy, sharpness, and contrast, resulting in lifelike images. Whether users are watching movies, playing video games, or viewing sports, the LT670H series promises an immersive experience with stunning visuals.

The series is equipped with built-in speakers that provide clear and powerful audio. Additionally, the televisions are designed to work seamlessly with LG’s Clear Voice technology, which enhances dialogue clarity amid background sounds. This feature ensures that viewers never miss a word, making the LT670H series ideal for watching dramas, sports, or even news broadcasts.

Connectivity is also a strong point for the LT670H series. These models come with multiple HDMI and USB ports, which allow users to easily connect various devices such as gaming consoles, streaming devices, or external hard drives. The inclusion of support for various audio and video formats further adds to the versatility of these televisions.

For gamers, the LT670H series offers low input lag, making it a suitable choice for fast-paced gaming. Features like Game Mode optimize settings for gaming, ensuring a fast and responsive experience.

Moreover, LG has implemented energy-saving technologies across the LT670H range, demonstrating their commitment to sustainability. The energy-efficient designs help in reducing electricity consumption without compromising performance.

In summary, the LG Electronics LT670H series, including the 42LT670H, 26LT670H, 32LT670H, and 37LT670H models, combines cutting-edge technology, superior sound quality, and comprehensive connectivity options. These features make the LT670H series an excellent choice for consumers looking for high-quality televisions that fit various room sizes and viewing preferences. With their blend of performance and aesthetic appeal, the LT670H models stand out in today’s competitive television market.