LG Electronics 47LE730N-ZA Lan Port Inspectionping Test, V-COM AdjustOnly LGDM+S Module

2)MAC Address Download

-Com 1,2,3,4 and 115200(Baud rate)

-Port connection button click(1)

-Load button click(2) for MAC Address write.

-Start MAC Address write button(3)

-Check the OK Or NG

3.3.LAN

(1)Equipment & Condition

A Each other connection to LAN Port of IP Hub and Jig

(2) LAN inspection solution

A LAN Port connection with PCB

A Network setting at MENU Mode of TV A setting automatic IP

A Setting state confirmation

-> If automatic setting is finished, you confirm IP and

3.4. LAN PORT INSPECTION(PING TEST)

Connect SET -> LAN port == PC -> LAN Port

SET PC

(1)Equipment setting

1)Play the LAN Port Test PROGRAM.

2)Input IP set up for an inspection to Test Program.

*IP Number : 12.12.2.2

(2)LAN PORT inspection (PING TEST)

1)Play the LAN Port Test Program.

2)Connect each other LAN Port Jack.

3)Play Test (F9) button and confirm OK Message.

4)Remove LAN CABLE

3.5. V-COM Adjust(Only LGD(M+S) Module)

- Why need Vcom adjustment?

A The Vcom (Common Voltage) is a Reference Voltage of Liquid Crystal Driving.

-> Liquid Crystal need for Polarity Change with every frame.

Circuit Block

MAC Address.

S

YDa ta I nput

S

T

EPowerw erInputI nput

M

Data (R,G,B ) &				Gamma
Control signal				Re fer ence V oltage
	Ti m in g	Data (R,G,B) & C ontrol signal			Gamm a Reference
In	Cont r oll er
		Control signal			Volta ge
t
er
face			So urce D		r ive I C
		Gat	Column Line		Panel
Po w er			VCOM
		e
Blo ck		Driv	CLC	CST
		e			Liquid
	VCOM	IC	Row Line TFT		Crystal

VCOM

Copyright © 2010 LG Electronics. Inc. All rights reserved.	- 8 -	LGE Internal Use Only
Only for training and service purposes