LG Electronics 47LE7380 Manual Adjustment, ADCGP2 Adjustment, Overview, Equipment & Condition

4. Manual Adjustment

4.1. ADC(GP2) Adjustment

4.1.1. Overview

ADC adjustment is needed to find the optimum black level and gain in Analog-to-Digital device and to compensate RGB deviation.

4.1.2. Equipment & Condition

(1)Adjust Remocon

(2)801GF(802B, 802F, 802R) or MSPG925FA Pattern Generator

-Resolution :

480i, 720*480 (MSPG-925FA -> Model: 209, Pattern: 65)

- 480i

1080p, 1920*1080 (MSPG-925FA -> Model: 225, Pattern:

65)- 1080p

-Pattern : Horizontal 100% Color Bar Pattern

-Pattern level: 0.7 ± 0.1 Vp-p

-Image

(3) Must use standard cable

4.1.3. Adjust method

(1)ADC 480i, 1080p Comp1

1)Check connected condition of Comp1 cable to the equipment

2)Give a 480i, 1080p Mode, Horizontal 100% Color Bar Pattern to Comp1.

(MSPG-925FA -> Model: 209, Pattern: 65) - 480i

(MSPG-925FA -> Model: 225, Pattern: 65) - 1080p

3)Change input mode as Component1 and picture mode as “Standard”

4)Press the In-start Key on the ADJ remote after at least 1 min of signal reception. Then, select 7. External ADC ->

1.COMP 1080p on the menu. Press enter key. The adjustment will start automatically.

5)If ADC calibration is successful, “ADC RGB Success” is displayed.

If ADC calibration is failure, “ADC RGB Fail” is displayed.

6)If ADC calibration is failure, after recheck ADC pattern or condition retry calibration Error message refer to 5).

(2)ADC 1920*1080 RGB

1)Check connected condition of Component & RGB cable to the equipment

2)Give a 1920*1080 Mode, 100 % Horizontal Color Bar Pattern to RGB port.

(MSPG-925 Series -> model:126 , pattern:65 )

3)Change input mode as RGB and picture mode as “Standard”.

4)Press the In-start Key on the ADJ remote after at least 1 min of signal reception. Then, select 7. External ADC ->

1.COMP 1080p on the menu. Press enter key. The adjustment will start automatically.

5)If ADC calibration is successful, “ADC RGB Success” is displayed.

If ADC calibration is failure, “ADC RGB Fail” is displayed.

6)If ADC calibration is failure, after recheck ADC pattern or condition retry calibration Error message refer to 5).

4.2.EDID(The Extended Display Identification Data)/DDC(Display Data Channel) download

(1)Overview

It is a VESA regulation. A PC or a MNT will display an optimal resolution through information sharing without any necessity of user input. It is a realization of “Plug and Play”.

(2)Equipment

-Adjust remote control

-Since embedded EDID data is used, EDID download JIG, HDMI cable and D-sub cable are not need.

(3)Download method

1)Press Adj. key on the Adj. R/C, then select “10.EDID D/L”, By pressing Enter key, enter EDID D/L menu.

2)Select [Start] button by pressing Enter key, HDMI1 / HDMI2 / HDMI3 / HDMI4 / RGB are Writing and display OK or NG.

For Analog EDID	For HDMI EDID
D-sub to D-sub
	DVI-D to HDMI or HDMI to HDMI

(4)EDID DATA A HDMI

0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F

0x00	00		FF	FF	FF	FF	FF	FF	00		1E	6D		ⓐ			ⓑ
0x01		ⓒ		01	03	80	10	09	78		0A	EE	91		A3	54	4C	99	26
0x02	0F		50	54	A1	08	00	71		4F	81	80	01		01	01	01	01	01
0x03	01		01	01	01	01	01	02		3A	80	18	71		38	2D	40	58	2C
0x04	45		00	A0	5A	00	00	00		1E	01	1D	00		72	51	D0	1E	20
0x05	6E		28	55	00	A0	5A	00	00		00	1E	00		00	00	FD	00	3A
0x06	3E		1E	53	10	00	0A	20	20		20	20	20		20		ⓓ
0x07									ⓓ									01	ⓔ
0x00	02		03	26	F1	4E	10	1F		84	13	05	14		03	02	12	20	21
0x01	22		15	01	26	15	07	50		09	57	07	67				ⓕ
0x02		ⓕ		E3	05	03	01	01		1D	80	18	71		1C	16	20	58	2C
0x03	25		00	A0	5A	00	00	00		9E	01	1D	00		80	51	D0	0C	20
0x04	40		80	35	00	A0	5A	00		00	00	1E	02		3A	80	18	71	38
0x05	2D		40	58	2C	45	00	A0		5A	00	00	00		1E	66	21	50	B0
0x06	51		00	1B	30	40	70	36		00	A0	5A	00		00	00	1E	00	00
0x07	00		00	00	00	00	00	00		00	00	00	00		00	00	00	01	ⓔ

ARGB

0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C0x0D 0x0E 0x0F

0x00	00		FF	FF	FF	FF	FF	FF	00	1E	6D		ⓐ			ⓑ
0x01		ⓒ		01	03	68	10	09	78	0A	EE	91		A3	54	4C	99	26
0x02	0F		50	54	A1	08	00	81	80	61	40	45		40	31	40	01	01
0x03	01		01	01	01	01	01	02	3A	80	18	71		38	2D	40	58	2C
0x04	45		00	A0	5A	00	00	00	1E	01	1D	00		72	51	D0	1E	20
0x05	6E		28	55	00	A0	5A	00	00	00	1E	00		00	00	FD	00	3A
0x06	3E		1E	53	10	00	0A	20	20	20	20	20		20		ⓓ
0x07									ⓓ								00	ⓔ

AReference

-HDMI1 ~ HDMI4 / RGB

-In the data of EDID, bellows may be different by S/W or Input mode.

Copyright © 2010 LG Electronics. Inc. All rights reserved.	- 10 -	LGE Internal Use Only
Only for training and service purposes