LG Electronics 42LH255H = Remote jack pack is not available or disabled, Set to 1 for blank

Page 140

Installer Menu

093 -RJP AVAILABLE (Remote Jack Pack Available)

0 = Remote jack pack is not available or disabled.

1 = Legacy Model RJPs: HDMI Mode

Enables RJP when an HDMI cable is inserted into RJP. Video is from HDMI. Audio stream is expected from HDMI source. If no audio is pre- sent, no audio will be heard.

2 = Legacy Model RJPs: DVI Mode

Enables RJP when an HDMI cable is inserted into RJP. Video is from HDMI however, Audio is from selected audio source, based on the RJP’s audio hierarchical priority.

5 = Scaler Model RJPs: HDMI Mode

Enables RJP when an HDMI cable is inserted into RJP. Video is from HDMI. Audio stream is expected from HDMI source. If no audio is pre- sent, no audio will be heard.

6 = Scaler Model RJPs: DVI Mode

Enables RJP when an HDMI cable is inserted into RJP.

Video is from HDMI however, Audio is from selected audio source, based on the RJP ’s audio hierarchical priority.

Notes:

See Reference section, RJP Input Hierarchy and RJP Models page.

If set to 1, 2, 5 or 6, item 040 Auto Camport is automatically set to 0. Settings 1, 2, 5 and 6 allow the lodge staff to customize each TV ’s RJP setup based on customer requirements.

094 - SAP MENU EN (2nd Audio Program)

Set to 1 to enable SAP feature on Function menu, if Function menu is available.

Set to 0 to disable SAP feature on Function menu, if Function menu is available.

096 - DEF. ASP. RATIO (Default Aspect Ratio)

Selects default aspect ratio at power up, see settings below.

Set to 0 for “Set By System”.

Set to 1 for 4:3.

Set to 2 for 16:9 (Factory Default).

Set to 3 for ‘Just Scan’

Set to 4 for Zoom

099 - BACK LIGHTING

Sets the TV screen brightness at power up, see settings below. Default setting is 100.

1 - 100 Static Backlighting.

(1 = Dimmest picture, 100 = Brightest picture.)

101 - 200 Dynamic Backlighting.

(101 = Dimmest picture, 200 = Brightest picture.) If settings are above

101, the TV automatically controls backlighting depending upon the picture level of the current program.

set to 255, to disable power saving mode.

102 - ATSC BAND

Sets up TV to receive different types of incoming signals: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC, 4=Same as NTSC.

103 - ATSC TUNE MODE

Sets ATSC tuning mode: Default set to 1 for Physical channel scan. Set to 0 for Virtual Channel scan.

104 - START MINOR CHANNEL

Sets XX-XX minor start channel number at power up: 0=NTSC. If not 0, number selected is the Minor start channel number.

106 - ASP RATIO LOCK (Aspect Ratio Lock)

Set to 1 to retain previous aspect ratio with power Off.

Set to 0 to retain default aspect ratio with power Off. See item 96 Default Aspect Ratio above.

116 - VIDEO MUTE EN (Video Mute Enable) Set to 0 for normal.

Set to 1 for blank.

117 - FACT DEFAULT (Factory Default) Set to 0 for normal.

Set to 1 to load presets to all of the previous item set- tings.

WARNING: Setting this to 1 will reload the factory defaults and clear the channel list including erasing any assigned

Channel Icons and custom channel Labels.

118 - Power Saving (Except 32LH240H)

Default is set to 3. When TV is in Standby mode, MPI card slot is powered by Standby power supply and embedded BLAN is not pow- ered. When TV is in Power On mode, MPI card slot is powered by main 12V power supply and embedded BLAN is powered. Note, TV must be powered on in order to communicate with the embedded BLAN module for configuration and control.

1 = MPI card slot Standby mode power provided from Standby power supply and embedded BLAN is always powered on.

3 = MPI card slot Standby mode power provided from Standby power supply and embedded BLAN only powered on when TV is powered on.

7 = MPI card slot Standby mode power provided from Standby power supply and embedded BLAN always powered off.

206-4118

P A G E 3 1

Image 140
Contents LCD TV Page FCC Notice Safety Instructions Important Safety InstructionsInstall the TV by the hanging power and signal Thunder or lighting stormCables on the back of the TV GroundingOnly Hg lamp used LCD TV AntennasContents Appendix Features of this TV BURN-IN on Your TV ScreenAccessories PreperationCD Manual Sub 15 pin CableChannel D,E Front Panel InformationSpeaker Preparation Back Panel Information32/37/42LH250H, 32/37/42LH255H, 37/42LH260H, 37LH265H Remote Control OUT UpdateReset HDMI/DVIStand Instruction Two Torx plus star headDetachment Vesa Wall Mounting 200RW230 AW-47LG30MSecure the power cable with the Protective Cable ManagementDesktop Pedestal Installation Swivel StandStand Attaching the TV to a DeskScrew Provided as parts of the product Preparation Antenna or Cable Connection Antenna Analog or DigitalComponent Connection External Equipment SetupHD Receiver Setup External Equipment Setup HDMI-DTVHdmi Connection Equipment Setup DVI to Hdmi ConnectionConnect the DVI output of the digital set-top box to HDMI/DVI in 1 jack on the TVDVD Setup External Equipment SetupComponent Input ports Connect the video outputs Y, PB, PR of the DVD toComposite RCA Connection VCR Setup Antenna ConnectionOther A/V Source Setup CamcorderPC Setup 640x350 720x400640x480 800x600Screen Setup for PC mode Enter Select the desired resolutionSelect Picture Enter Select Screen RGB-PCEnter Select Yes Select Auto configCan adjust the Position, S i z e or Phase Adjustment for screen Position, Size, and Phase Screen Reset Reset to original factory values Select YesUSB Connection Connect the USB device to the USB I N jack on the side of TVControl Remote Control FunctionsWatching TV / Channel Control Loose the bolt on the battery compartment cover Watching TV / Channel ControlChannel Selection Volume AdjustmentTurning on TV TV / Channel Control ON-SCREEN Menus SelectionWatching Select Channel Channel SetupAuto Scan Auto Tuning Add/Delete Channel Manual Tuning ENTERSelect Manual TuningWatching TV / Channel Select channel you want to add or deleteSelect a channel Channel EditingSelect Channel Edit Channel Label Select ChannelHDMI2 HDMI1 RGB-PC Component Input ListSelect the desired input source Press the Eject button before removing the USB device USBEntry Modes Precautions when using the USB device Photo List Screen ComponentsSelect USB Select Photo ListPhoto Selection and Popup Menu Enter Show the Popup menuUse the CH button to navigate in the photo Select the desired photosFull Screen Menu Photo ListEnter Select the Slideshow, BGM Music List Select Music ListUse the CH button to navigate in the music Music Selection and Popup MenuShow the Popup menu USB You can also adjust Aspect Ratio in the Picture menu Picture ControlPicture Size Aspect Ratio Control Picture ControlSet by program 169Zoom Just ScanPreset Picture Settings Picture Mode PresetSelect Picture Mode Select Vivid, Standard, NaturalColor Tone Preset Select Advanced ControlManual Picture Adjustment User Mode Make appropriate adjustmentsSelect Backlight, Contrast, Brightness Sharpness, Color, or TintColor, Noise Reduction, Gamma, Color Picture Improvement TechnologySelect Dynamic Contrast, Dynamic Select Low or High Return to the previous menu Advanced Control Black Darkness LevelSelect Black Advanced Control EYE Care PictureSelect Eye Select O n or Off Return to the previous menuAdvanced Control Real Cinema Select Real CinemaPicture Reset Demo ModeEnter Initialize the adjusted value Select Picture ResetSound & Language Control Auto Volume Leveler Auto VolumeSound & Language Control Preset Sound Settings Sound Mode Sound Setting Adjustment User Mode Adjust the sound to suit your taste and room situationsSelect Standard, Music Select Treble or BassSRS Trusurround XT Select SRS TruSurround XTSelect Clear Voice Adjustment for Clear Voice Level With selecting O nClear Voice Balance TV Speakers ON/OFF Setup Select TVAudio Reset Initialize the adjusted valueEach time you press the SAP button STEREO/SAP Broadcast SetupMono, Stereo, or SAP appear in turn Return to TV viewing Audio Language Return to the previous menu Return to TV viewing ON-SCREEN Menus Language SelectionMenus can be shown on the screen in the selected language Caption Mode Analog Broadcasting System CaptionsSound & Language CaptionSelect O n Digital Broadcasting System CaptionsSelect Option Caption Option CustomAuto Clock Setup Time SettingClock Setting Manual Clock Setup Time SettingAuto ON/OFF Time Setting Select TimeSelect Off Time or On Select and set Hour or Minute Return to the previous menuYou can also adjust Sleep Timer in the Time menu Sleep Timer SettingSleep Time turns the TV off at the preset time SET Password & Lock System Setting up Your PasswordParental Control / Ratings Control / RatingSelect Lock System When you select O n, the Lock System Is enableInput the password Lock SystemSet Password Change the password by inputting a new password twiceEnter Select Lock Input the password Select Set password Same 4 digits on the ConfirmChannel Blocking Parental Control / RatingMovie & TV Rating Movie Rating MpaaTV Rating Children Select TV Rating-Children Age applies to TV-Y, TV-Y7Select Age or Fantasy Violence Fantasy Violence applies to TV-Y7TV Rating General If a Downloadable rating is locked Input the password PorarilyDownloadable Rating Enables you to block an input External Input BlockingTroubleshooting Remote control Doesn’t work Power is suddenly Turned offAppendix No picture &No soundCheck the signal cable Or single color Reinstall the PC video cardSee troubleshooting flow chart No PowerMaintenance Configuration of frame IR CodesOutput waveform Lead code Repeat codeRemote control Button 10-19 Number Key Remote control ButtonDash/LIST Remote control Button Remote control Button RatioPreamble Open Source LicenseVersion 2, June Page No Warranty END of Terms and Conditions GNU Lesser General Public License Version 2.1, FebruaryPage 100 101 How to apply these terms to your new libraries Mozilla Public License Distribution Obligations Application of license Availability of source codeDescription of modifications Intellectual property matters Third party claimsRepresentations Required noticesDistribution of executable versions Larger works106 Exhibit a -Mozilla Public License Provisions of license are applicable instead of thoseCommercial Mode Setup Guide For Customer Support/Service, please call Cleaning Accessories, Carts, and StandsPower Sources Power Cord Polarization Some modelsPower Lines Damage Requiring ServiceReplacement Parts Safety CheckTable of Contents Setup Checklist Commercial Mode Setup for Master TV Installer Overview LG Installer RemoteTLL-1100A Clone Programmer TypicalFTG Card Mode of Operation Overview LMT7Z7 Configured Card in FTG Mode of OperationReceives RF signals LMT7Z7 cardFTG Card Mode of Operation Contd Communications Setup MenuFTG Channel Map Overview Video onlyExits menu and returns to logical channel listing Removes channel from lineupFTG Installer Menu Overview FTG Operation Troubleshooting Error MessagesLMT7Z7 Configured Card in FTG Mode of Operation Problem Probable Cause SolutionTypical Installer Remote Control Installing Batteries in Installer Remote ControlInstaller Remote Control Typical Key Functions Volume UP/DOWNRear Connections Panel Connect to video output port on external device 2 Input Side Connections Panel / RF Antenna ConnectionRF Antenna Connection RGB/DVI Audio input from RJP Connect to composite Video/Audio output jacks onConnection for RGB hookup from RJP MPI Card Slot / PPV Card Installation TV Features Configuration Menus Overview Main TV MenusTLL-1100A Cloning Connections/Learning Setup On Master TVOn TLL-1100A On Target TVLT2002 Cloning Connections/Learning Setup Antenna Or CatvSet the Clock Optional LT2002 Cloning Learning Setup Learning the Master TV SetupLearn Setup from Master TV Teach Master TV’s Setup to the target TV Disconnect TV Power for 15 SecondsReference LT2002 Cloning Procedure Troubleshooting Reset Clone After Static ShockClone Programmer Troubleshooting Problem Possible Causes Possible Solutions Clone ProgrammerInstaller Menu Accessing the Installer’s MenuUsing the Installer’s Menu Installer Menu Items 000 throughInstaller Menu Items 035 through Detailed Descriptions of Installer Menu Items Specifies entry sequence to the Installer Menu= Broadcast = Last channel ~ 125 = Ch= Video = Hdmi = Component = Video = HdmiTimeout = 25.5MS + 25.5 MS* Handshake time = Black = Cyan= Blue = Red = Green = Violet= Remote jack pack is not available or disabled = Dimmest picture, 100 = Brightest pictureSet to 1 for blank G E 3Clonable Menu Features Chart in this manual Reference Detailed Instructions For Making a Master TVMaking a Master TV Detailed InstructionsAdding Channel Icons and Labels in the 2-5-4 + Menu Mode Reference Clonable Menu Features Caption ModeTV Speaker Violence TV Rating General AgeUSB End User Features USB Device SetupView Pictures View Picture with MusicReference USB Cloning Master TV Profile Setup-Learning Optional Edit / Change File NameReference USB Cloning Master TV Profile Setup-Teaching For 32LH240HCamport Operation PPV TV Camport Auto Sense OperationCamport Operation Stand-Alone Channel not included in channel scan in TV controller TV Aux Input Configuration / TroubleshootingTroubleshooting Troubleshooting G E 4 Troubleshooting Flow Chart Controller Quick CheckCommercial Mode Check Programming provided by a cable service Glossary of TermsTV is controlled by external network High-definition multi-media interfaceLAN Overview LAN Setup and Overview Except 32LH240HMPI Slot Power Reference RJP Model List and Input Hierarchy RJP Model List Legacy Models Scaler ModelsModel Serial
Related manuals
Manual 40 pages 19.55 Kb Manual 46 pages 38.94 Kb Manual 156 pages 12.6 Kb

42LH250H, 37LH255H, 42LH260H, 42LH255H, 32LH240H specifications

LG Electronics is renowned for its innovative television technology, and models such as the SAC34026004, 42LH260H, 37LH255H, 32LH250H, and 32LH255H embody this legacy. Each of these models comes equipped with features and technologies that provide an immersive viewing experience.

The SAC34026004 model serves as a versatile option for consumers looking for an efficient entertainment solution. This television integrates advanced LED technology, which enhances brightness and color accuracy, making it suitable for various lighting conditions. Additionally, it offers smart features that facilitate seamless access to streaming services, allowing viewers to enjoy their favorite content with ease.

Turning to the 42LH260H, this television boasts a 42-inch screen that strikes an ideal balance between size and functionality. With a Full HD resolution of 1920 x 1080 pixels, it ensures clarity and vibrant colors in all types of media. The model is equipped with HDMI inputs, granting users the ability to connect multiple devices effortlessly. Its sleek design also makes it an attractive addition to any room.

The 37LH255H model presents an excellent choice for consumers who prefer a slightly smaller screen. With a 37-inch display, it maintains high-quality visuals with a sharp and vivid picture. The model includes both digital and analog tuners, offering flexibility in content viewing. Its energy-efficient features allow consumers to enjoy high-performance viewing without increasing energy costs significantly.

The 32LH250H and 32LH255H models cater to those seeking compact alternatives without compromising quality. Both models include a 32-inch display that fits comfortably in smaller spaces, making them ideal for bedrooms or kitchens. Like their larger counterparts, these televisions utilize LED technology to provide exceptional picture quality.

In summary, the LG Electronics SAC34026004, 42LH260H, 37LH255H, 32LH250H, and 32LH255H models showcase a commitment to quality, innovation, and user-friendly features. Each television integrates advanced technologies designed to enhance the home viewing experience, making them suitable for a variety of environments and preferences. Whether it is through sharp visuals, energy efficiency, or smart capabilities, LG continues to set the standard in the television market.