LG Electronics 37LH250H, 42LH255H, 42LH260H, 42LH250H, 37LH260H, 37LH255H, 37LH265H FCC Notice

Page 3

WARNING / CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

WARNING / CAUTION

To prevent fire or shock hazards, do not expose this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi- tions: (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (of the device).

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product

1

Image 3
Contents LCD TV Page FCC Notice Important Safety Instructions Safety InstructionsGrounding Install the TV by the hanging power and signalThunder or lighting storm Cables on the back of the TVAntennas Only Hg lamp used LCD TVContents Appendix BURN-IN on Your TV Screen Features of this TVSub 15 pin Cable AccessoriesPreperation CD ManualFront Panel Information SpeakerChannel D,E Back Panel Information 32/37/42LH250H, 32/37/42LH255H, 37/42LH260H, 37LH265HPreparation HDMI/DVI Remote Control OUTUpdate ResetTwo Torx plus star head Stand InstructionDetachment AW-47LG30M Vesa Wall Mounting200 RW230Cable Management Secure the power cable with the ProtectiveSwivel Stand Desktop Pedestal InstallationAttaching the TV to a Desk Screw Provided as parts of the productStand Preparation Antenna Analog or Digital Antenna or Cable ConnectionExternal Equipment Setup HD Receiver SetupComponent Connection Equipment Setup HDMI-DTV Hdmi ConnectionExternal HDMI/DVI in 1 jack on the TV Equipment SetupDVI to Hdmi Connection Connect the DVI output of the digital set-top box toConnect the video outputs Y, PB, PR of the DVD to DVD SetupExternal Equipment Setup Component Input portsComposite RCA Connection Antenna Connection VCR SetupCamcorder Other A/V Source SetupPC Setup 800x600 640x350720x400 640x480Enter Select Screen RGB-PC Screen Setup for PC modeEnter Select the desired resolution Select PictureSelect Auto config Can adjust the Position, S i z e or PhaseEnter Select Yes Adjustment for screen Position, Size, and Phase Select Yes Screen Reset Reset to original factory valuesConnect the USB device to the USB I N jack on the side of TV USB ConnectionRemote Control Functions Watching TV / Channel ControlControl Watching TV / Channel Control Loose the bolt on the battery compartment coverVolume Adjustment Turning on TVChannel Selection ON-SCREEN Menus Selection WatchingTV / Channel Control Channel Setup Auto Scan Auto TuningSelect Channel Select channel you want to add or delete Add/Delete Channel Manual TuningENTERSelect Manual Tuning Watching TV / ChannelChannel Editing Select Channel EditSelect a channel Select Channel Channel LabelInput List Select the desired input sourceHDMI2 HDMI1 RGB-PC Component USB Entry ModesPress the Eject button before removing the USB device Precautions when using the USB device Select Photo List Photo ListScreen Components Select USBSelect the desired photos Photo Selection and Popup MenuEnter Show the Popup menu Use the CH button to navigate in the photoPhoto List Full Screen MenuEnter Select the Slideshow, BGM Select Music List Music ListMusic Selection and Popup Menu Show the Popup menuUse the CH button to navigate in the music USB Picture Control You can also adjust Aspect Ratio in the Picture menuPicture Control Picture Size Aspect Ratio ControlJust Scan Set by program169 ZoomSelect Vivid, Standard, Natural Preset Picture SettingsPicture Mode Preset Select Picture ModeSelect Advanced Control Color Tone PresetSharpness, Color, or Tint Manual Picture Adjustment User ModeMake appropriate adjustments Select Backlight, Contrast, BrightnessPicture Improvement Technology Select Dynamic Contrast, DynamicColor, Noise Reduction, Gamma, Color Advanced Control Black Darkness Level Select BlackSelect Low or High Return to the previous menu Select O n or Off Return to the previous menu Advanced Control EYE CarePicture Select EyeSelect Real Cinema Advanced Control Real CinemaSelect Picture Reset Picture ResetDemo Mode Enter Initialize the adjusted valueAuto Volume Leveler Auto Volume Sound & Language ControlSound & Language Control Preset Sound Settings Sound Mode Select Treble or Bass Sound Setting Adjustment User ModeAdjust the sound to suit your taste and room situations Select Standard, MusicSelect SRS TruSurround XT SRS Trusurround XTAdjustment for Clear Voice Level With selecting O n Clear VoiceSelect Clear Voice Balance Select TV TV Speakers ON/OFF SetupInitialize the adjusted value Audio ResetSTEREO/SAP Broadcast Setup Mono, Stereo, or SAP appear in turn Return to TV viewingEach time you press the SAP button Audio Language ON-SCREEN Menus Language Selection Menus can be shown on the screen in the selected languageReturn to the previous menu Return to TV viewing Caption Caption ModeAnalog Broadcasting System Captions Sound & LanguageDigital Broadcasting System Captions Select OptionSelect O n Custom Caption OptionTime Setting Clock SettingAuto Clock Setup Time Setting Manual Clock SetupSelect and set Hour or Minute Return to the previous menu Auto ON/OFF Time SettingSelect Time Select Off Time or OnSleep Timer Setting Sleep Time turns the TV off at the preset timeYou can also adjust Sleep Timer in the Time menu Control / Rating SET Password & Lock SystemSetting up Your Password Parental Control / RatingsLock System Select Lock System When you select O n, the Lock SystemIs enable Input the passwordSame 4 digits on the Confirm Set PasswordChange the password by inputting a new password twice Enter Select Lock Input the password Select Set passwordParental Control / Rating Channel BlockingMovie Rating Mpaa Movie & TV RatingFantasy Violence applies to TV-Y7 TV Rating ChildrenSelect TV Rating-Children Age applies to TV-Y, TV-Y7 Select Age or Fantasy ViolenceTV Rating General Input the password Porarily Downloadable RatingIf a Downloadable rating is locked External Input Blocking Enables you to block an inputNo picture &No sound TroubleshootingRemote control Doesn’t work Power is suddenly Turned off AppendixNo Power Check the signal cableOr single color Reinstall the PC video card See troubleshooting flow chartMaintenance Lead code Repeat code Configuration of frameIR Codes Output waveformRemote control Button Ratio Remote control Button10-19 Number Key Remote control Button Dash/LIST Remote control ButtonOpen Source License Version 2, JunePreamble Page No Warranty END of Terms and Conditions Version 2.1, February GNU Lesser General Public LicensePage 100 101 How to apply these terms to your new libraries Mozilla Public License Intellectual property matters Third party claims Distribution Obligations Application of licenseAvailability of source code Description of modificationsLarger works RepresentationsRequired notices Distribution of executable versions106 Provisions of license are applicable instead of those Exhibit a -Mozilla Public LicenseCommercial Mode Setup Guide For Customer Support/Service, please call Power Cord Polarization Some models CleaningAccessories, Carts, and Stands Power SourcesSafety Check Power LinesDamage Requiring Service Replacement PartsTable of Contents Setup Checklist Commercial Mode Setup for Master TV Typical Installer OverviewLG Installer Remote TLL-1100A Clone ProgrammerLMT7Z7 card FTG Card Mode of Operation OverviewLMT7Z7 Configured Card in FTG Mode of Operation Receives RF signalsCommunications Setup Menu FTG Card Mode of Operation ContdRemoves channel from lineup FTG Channel Map OverviewVideo only Exits menu and returns to logical channel listingFTG Installer Menu Overview Problem Probable Cause Solution FTG Operation TroubleshootingError Messages LMT7Z7 Configured Card in FTG Mode of OperationInstalling Batteries in Installer Remote Control Typical Installer Remote ControlVolume UP/DOWN Installer Remote Control Typical Key FunctionsRear Connections Panel 2 Input Side Connections Panel / RF Antenna Connection RF Antenna ConnectionConnect to video output port on external device Connect to composite Video/Audio output jacks on Connection for RGB hookup from RJPRGB/DVI Audio input from RJP MPI Card Slot / PPV Card Installation Main TV Menus TV Features Configuration Menus OverviewOn Target TV TLL-1100A Cloning Connections/Learning SetupOn Master TV On TLL-1100AAntenna Or Catv LT2002 Cloning Connections/Learning SetupLT2002 Cloning Learning Setup Learning the Master TV Setup Learn Setup from Master TVSet the Clock Optional Disconnect TV Power for 15 Seconds Teach Master TV’s Setup to the target TVProblem Possible Causes Possible Solutions Clone Programmer Reference LT2002 Cloning Procedure TroubleshootingReset Clone After Static Shock Clone Programmer TroubleshootingInstaller Menu Items 000 through Installer MenuAccessing the Installer’s Menu Using the Installer’s MenuInstaller Menu Items 035 through = Last channel ~ 125 = Ch Detailed Descriptions of Installer Menu ItemsSpecifies entry sequence to the Installer Menu = Broadcast= Video = Hdmi = Video = Hdmi = Component= Green = Violet Timeout = 25.5MS + 25.5 MS* Handshake time= Black = Cyan = Blue = RedG E 3 = Remote jack pack is not available or disabled= Dimmest picture, 100 = Brightest picture Set to 1 for blankDetailed Instructions Clonable Menu Features Chart in this manualReference Detailed Instructions For Making a Master TV Making a Master TVAdding Channel Icons and Labels in the 2-5-4 + Menu Mode TV Rating General Age Reference Clonable Menu FeaturesCaption Mode TV Speaker ViolenceView Picture with Music USB End User FeaturesUSB Device Setup View PicturesOptional Edit / Change File Name Reference USB Cloning Master TV Profile Setup-LearningFor 32LH240H Reference USB Cloning Master TV Profile Setup-TeachingTV Camport Auto Sense Operation Camport Operation Stand-AloneCamport Operation PPV TV Aux Input Configuration / Troubleshooting TroubleshootingChannel not included in channel scan in TV controller Troubleshooting G E 4 Controller Quick Check Troubleshooting Flow ChartCommercial Mode Check High-definition multi-media interface Programming provided by a cable serviceGlossary of Terms TV is controlled by external networkLAN Setup and Overview Except 32LH240H MPI Slot PowerLAN Overview RJP Model List Legacy Models Scaler Models Reference RJP Model List and Input HierarchyModel Serial
Related manuals
Manual 40 pages 19.55 Kb Manual 46 pages 38.94 Kb Manual 156 pages 12.6 Kb