LG Electronics 37LH260H LAN Overview, LAN Setup and Overview Except 32LH240H, MPI Slot Power

Page 154

B-LAN Overview

B-LAN Setup and Overview (Except 32LH240H)

Power to the B-LAN module is controlled by Installer Menu Item 118 Power savings. By default, value 003, the B-LAN module is only powered on when the TV is powered on. There are two bits in the Power Savings item to control power to the B-LAN module, one for power during TV Standby mode and one for power during TV Power On mode. When the bit is 0, the B-LAN module is pow- ered. When the bit is 1, the B-LAN module is not powered (Power Savings is Enabled).

		TV Standby State		TV Power On State
	Power Saving
	Power Saving	BLAN Power	MPI Slot Power	BLAN Power	MPI Slot Power
		BLAN Power	MPI Slot Power	BLAN Power	MPI Slot Power

	1	On	Standby	On	Main

	3	Off	Standby	On	Main

	7	Off	Standby	Off	Main
	7

The B-LAN module is internal to the TV. It allows the Hotel/Institution headend equipment to communicate with the TV for config- uration and control. This communication is via the institution’r RF distribution system. The control device at the headend (ex FMA- LG101) can control multiple TVs. When the TV is first installed, it must be powered on in order for the headend to be able to com- municate with the B-LAN. At this point, if it is desired for the BLAN to always be powered on, particularly during Standby mode, the BLAN Standby Power Saving mode setting should be downloaded as Disabled. The new settings will not be active until the BLAN actually downloads the configuration data to the PTC and the PTC is reset.

If it known that the application requires only using the MPI card slot and not the embedded BLAN, the installer can go into the Installer Settings menu and enable the BLAN Power Savings mode, in both Standby and TV power on.

206-4118

P A G E 4 5

Image 154

Contents LCD TV Page FCC Notice Safety Instructions Important Safety InstructionsCables on the back of the TV Install the TV by the hanging power and signalThunder or lighting storm GroundingOnly Hg lamp used LCD TV AntennasContents Appendix Features of this TV BURN-IN on Your TV ScreenCD Manual AccessoriesPreperation Sub 15 pin CableSpeaker Front Panel InformationChannel D,E 32/37/42LH250H, 32/37/42LH255H, 37/42LH260H, 37LH265H Back Panel InformationPreparation Reset Remote Control OUTUpdate HDMI/DVIStand Instruction Two Torx plus star headDetachment RW230 Vesa Wall Mounting200 AW-47LG30MSecure the power cable with the Protective Cable ManagementDesktop Pedestal Installation Swivel StandScrew Provided as parts of the product Attaching the TV to a DeskStand Preparation Antenna or Cable Connection Antenna Analog or DigitalHD Receiver Setup External Equipment SetupComponent Connection Hdmi Connection Equipment Setup HDMI-DTVExternal Connect the DVI output of the digital set-top box to Equipment SetupDVI to Hdmi Connection HDMI/DVI in 1 jack on the TVComponent Input ports DVD SetupExternal Equipment Setup Connect the video outputs Y, PB, PR of the DVD toComposite RCA Connection VCR Setup Antenna ConnectionOther A/V Source Setup CamcorderPC Setup 640x480 640x350720x400 800x600Select Picture Screen Setup for PC modeEnter Select the desired resolution Enter Select Screen RGB-PCCan adjust the Position, S i z e or Phase Select Auto configEnter Select Yes Adjustment for screen Position, Size, and Phase Screen Reset Reset to original factory values Select YesUSB Connection Connect the USB device to the USB I N jack on the side of TVWatching TV / Channel Control Remote Control FunctionsControl Loose the bolt on the battery compartment cover Watching TV / Channel ControlTurning on TV Volume AdjustmentChannel Selection Watching ON-SCREEN Menus SelectionTV / Channel Control Auto Scan Auto Tuning Channel SetupSelect Channel Watching TV / Channel Add/Delete Channel Manual TuningENTERSelect Manual Tuning Select channel you want to add or deleteSelect Channel Edit Channel EditingSelect a channel Channel Label Select ChannelSelect the desired input source Input ListHDMI2 HDMI1 RGB-PC Component Entry Modes USBPress the Eject button before removing the USB device Precautions when using the USB device Select USB Photo ListScreen Components Select Photo ListUse the CH button to navigate in the photo Photo Selection and Popup MenuEnter Show the Popup menu Select the desired photosFull Screen Menu Photo ListEnter Select the Slideshow, BGM Music List Select Music ListShow the Popup menu Music Selection and Popup MenuUse the CH button to navigate in the music USB Picture Size Aspect Ratio Control You can also adjust Aspect Ratio in the Picture menuPicture Control Picture ControlZoom Set by program169 Just ScanSelect Picture Mode Preset Picture SettingsPicture Mode Preset Select Vivid, Standard, NaturalColor Tone Preset Select Advanced ControlSelect Backlight, Contrast, Brightness Manual Picture Adjustment User ModeMake appropriate adjustments Sharpness, Color, or TintSelect Dynamic Contrast, Dynamic Picture Improvement TechnologyColor, Noise Reduction, Gamma, Color Select Black Advanced Control Black Darkness LevelSelect Low or High Return to the previous menu Select Eye Advanced Control EYE CarePicture Select O n or Off Return to the previous menuAdvanced Control Real Cinema Select Real CinemaEnter Initialize the adjusted value Picture ResetDemo Mode Select Picture ResetSound & Language Control Auto Volume Leveler Auto VolumeSound & Language Control Preset Sound Settings Sound Mode Select Standard, Music Sound Setting Adjustment User ModeAdjust the sound to suit your taste and room situations Select Treble or BassSRS Trusurround XT Select SRS TruSurround XTClear Voice Adjustment for Clear Voice Level With selecting O nSelect Clear Voice Balance TV Speakers ON/OFF Setup Select TVAudio Reset Initialize the adjusted valueMono, Stereo, or SAP appear in turn Return to TV viewing STEREO/SAP Broadcast SetupEach time you press the SAP button Audio Language Menus can be shown on the screen in the selected language ON-SCREEN Menus Language SelectionReturn to the previous menu Return to TV viewing Sound & Language Caption ModeAnalog Broadcasting System Captions CaptionSelect Option Digital Broadcasting System CaptionsSelect O n Caption Option CustomClock Setting Time SettingAuto Clock Setup Manual Clock Setup Time SettingSelect Off Time or On Auto ON/OFF Time SettingSelect Time Select and set Hour or Minute Return to the previous menuSleep Time turns the TV off at the preset time Sleep Timer SettingYou can also adjust Sleep Timer in the Time menu Parental Control / Ratings SET Password & Lock SystemSetting up Your Password Control / RatingInput the password Select Lock System When you select O n, the Lock SystemIs enable Lock SystemEnter Select Lock Input the password Select Set password Set PasswordChange the password by inputting a new password twice Same 4 digits on the ConfirmChannel Blocking Parental Control / RatingMovie & TV Rating Movie Rating MpaaSelect Age or Fantasy Violence TV Rating ChildrenSelect TV Rating-Children Age applies to TV-Y, TV-Y7 Fantasy Violence applies to TV-Y7TV Rating General Downloadable Rating Input the password PorarilyIf a Downloadable rating is locked Enables you to block an input External Input BlockingAppendix TroubleshootingRemote control Doesn’t work Power is suddenly Turned off No picture &No soundSee troubleshooting flow chart Check the signal cableOr single color Reinstall the PC video card No PowerMaintenance Output waveform Configuration of frameIR Codes Lead code Repeat codeDash/LIST Remote control Button Remote control Button10-19 Number Key Remote control Button Remote control Button RatioVersion 2, June Open Source LicensePreamble Page No Warranty END of Terms and Conditions GNU Lesser General Public License Version 2.1, FebruaryPage 100 101 How to apply these terms to your new libraries Mozilla Public License Description of modifications Distribution Obligations Application of licenseAvailability of source code Intellectual property matters Third party claimsDistribution of executable versions RepresentationsRequired notices Larger works106 Exhibit a -Mozilla Public License Provisions of license are applicable instead of thoseCommercial Mode Setup Guide For Customer Support/Service, please call Power Sources CleaningAccessories, Carts, and Stands Power Cord Polarization Some modelsReplacement Parts Power LinesDamage Requiring Service Safety CheckTable of Contents Setup Checklist Commercial Mode Setup for Master TV TLL-1100A Clone Programmer Installer OverviewLG Installer Remote TypicalReceives RF signals FTG Card Mode of Operation OverviewLMT7Z7 Configured Card in FTG Mode of Operation LMT7Z7 cardFTG Card Mode of Operation Contd Communications Setup MenuExits menu and returns to logical channel listing FTG Channel Map OverviewVideo only Removes channel from lineupFTG Installer Menu Overview LMT7Z7 Configured Card in FTG Mode of Operation FTG Operation TroubleshootingError Messages Problem Probable Cause SolutionTypical Installer Remote Control Installing Batteries in Installer Remote ControlInstaller Remote Control Typical Key Functions Volume UP/DOWNRear Connections Panel RF Antenna Connection 2 Input Side Connections Panel / RF Antenna ConnectionConnect to video output port on external device Connection for RGB hookup from RJP Connect to composite Video/Audio output jacks onRGB/DVI Audio input from RJP MPI Card Slot / PPV Card Installation TV Features Configuration Menus Overview Main TV MenusOn TLL-1100A TLL-1100A Cloning Connections/Learning SetupOn Master TV On Target TVLT2002 Cloning Connections/Learning Setup Antenna Or CatvLearn Setup from Master TV LT2002 Cloning Learning Setup Learning the Master TV SetupSet the Clock Optional Teach Master TV’s Setup to the target TV Disconnect TV Power for 15 SecondsClone Programmer Troubleshooting Reference LT2002 Cloning Procedure TroubleshootingReset Clone After Static Shock Problem Possible Causes Possible Solutions Clone ProgrammerUsing the Installer’s Menu Installer MenuAccessing the Installer’s Menu Installer Menu Items 000 throughInstaller Menu Items 035 through = Broadcast Detailed Descriptions of Installer Menu ItemsSpecifies entry sequence to the Installer Menu = Last channel ~ 125 = Ch= Video = Hdmi = Component = Video = Hdmi= Blue = Red Timeout = 25.5MS + 25.5 MS* Handshake time= Black = Cyan = Green = VioletSet to 1 for blank = Remote jack pack is not available or disabled= Dimmest picture, 100 = Brightest picture G E 3Making a Master TV Clonable Menu Features Chart in this manualReference Detailed Instructions For Making a Master TV Detailed InstructionsAdding Channel Icons and Labels in the 2-5-4 + Menu Mode TV Speaker Violence Reference Clonable Menu FeaturesCaption Mode TV Rating General AgeView Pictures USB End User FeaturesUSB Device Setup View Picture with MusicReference USB Cloning Master TV Profile Setup-Learning Optional Edit / Change File NameReference USB Cloning Master TV Profile Setup-Teaching For 32LH240HCamport Operation Stand-Alone TV Camport Auto Sense OperationCamport Operation PPV Troubleshooting TV Aux Input Configuration / TroubleshootingChannel not included in channel scan in TV controller Troubleshooting G E 4 Troubleshooting Flow Chart Controller Quick CheckCommercial Mode Check TV is controlled by external network Programming provided by a cable serviceGlossary of Terms High-definition multi-media interfaceMPI Slot Power LAN Setup and Overview Except 32LH240HLAN Overview Reference RJP Model List and Input Hierarchy RJP Model List Legacy Models Scaler ModelsModel Serial

Related manuals

Manual 40 pages 19.55 Kb

Manual 46 pages 38.94 Kb

Manual 156 pages 12.6 Kb