Operation
Sound Menu Options
ENGLISH
TV Speaker
-You can adjust internal speaker status.
-In COMPONENT, RGB[PC] and HDMI[PC] mode, TV speak- er/variable audio can be output even though there is no video signal.
-If you want to use your external
Stereo / Dual Reception
-When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
On Screen Display
Press the I/II button to received broadcast state.
Broadcast | On screen Display |
Mono | MONO |
Stereo | STEREO |
Dual | DUAL I |
Mono Sound Selection
In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again.
Language Selection for Dual Language Broadcast
If a programme received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I + II by pressing the I/II button repeatedly.
•DUAL I sends the primary broadcast language to the loud- speakers.
•DUAL II sends the secondary broadcast language to the loudspeakers.
• DUAL I + II sends a separate language to each loudspeaker.
NICAM Reception (option)
-If your Plasma Display is equipped with the PDP Tuner for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly.
•When NICAM mono is received, you can select NICAM MONO or FM MONO.
•When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono.
•When NICAM dual is received, you can select NICAM
DUAL I, NICAM DUAL II, NICAM DUAL I + II, or MONO. When FM mono is selected the display MONO appears on the screen.
Sound output selection
In AV, Component, RGB or HDMI mode, you can select output sound for the left and right loudspeakers.
Repeatedly press the I/II button to select the sound output.
•L+R : Audio signal from audio L input is sent to left loud- speaker and audio signal from audio R input is sent to right
•L+L : Audio signal from audio L input is sent to left and right
•R+R : Audio signal from audio R input is sent to left and right
Time Menu Options
Setting the Clock
-If current time setting is erased by a power failure or the set is unplugged, reset the clock.
STATION | Clock | G | - - | : | - - |
| Off time |
|
|
|
|
PICTURE | On time |
|
|
|
|
| Auto sleep |
|
|
|
|
SOUND |
|
|
|
|
|
TIME |
|
|
|
|
|
SPECIAL |
|
|
|
|
|
SCREEN |
|
|
|
|
|
PIP/DW | Menu Prev. |
|
|
|
|
|
|
|
|
|
Setting the On/Off Timer
-Timer function operates only if current time has been already set.
-Off Timer function overrides on Timer function if they are set to the same time.
-The set must be in standby mode for the On Timer to work.
-Two hours after the set is switched on by the on time func- tion it will automatically switch back to standby mode unless a button has been pressed.
Auto Sleep
-If there is no input signal, the monitor turn off automatically after 10 minutes.
Sleep Timer
-Sleep timer turns the set off at the preset time.
-Press the SLEEP button to select the number of minutes.
zz
The display 
a. To check the remaining sleep time, press the SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP button
zz
until the display 
c. If you turn the set off after setting the sleep timer, the setting will be erased.
Owner’s Manual 19