Operation
Screen Menu Options
ENGLISH
Setting Picture Format
-You can watch the screen in various picture formats; Spectacle,
Full (option), Original, 4:3, 16:9 (Wide), 14:9 and Zoom.
•Spectacle
When your TV receives the wide screen signal, following selection will lead you to adjust the picture horizontally, in
• Full (option)
When your TV receives the wide screen signal, following selection will lead you to adjust the picture horizontally or ver- tically, in a linear proportion, to fill the entire screen fully.
•Original
When your TV receives the wide screen signal, it will be auto- matically changed to the picture format to be sent.
•4:3
Following selection will lead you to view a picture with an orig- inal 4:3 aspect ratio, with gray bars appearing at both the left and right sides.
• 16:9 (Wide)
Following selection will lead you to adjust the picture horizon- tally, in a linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs).
•14:9
You can enjoy the picture format of 14:9 or general TV pro- gramme through the 14:9 mode. The screen 14:9 is viewed just like that the screen 4:3 is magnified to the left / right.
•Zoom
Following selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and bottom portions of the picture will be cropped.
-You can only select 4:3 and 16:9 (Wide) in RGB[PC], HDMI[PC] mode only.
-You can only select 4:3, 16:9 (Wide) and Zoom in RGB[DTV], HDMI[DTV], Component [DTV] mode only.
-You can only select Spectacle, Full (option), 4:3, 16:9 (Wide), 14:9 and Zoom in Component [480i/576i] mode only.
-There might be uncomfortable in full mode. Then change into other mode.
Picture Size Zoom
-When enlarging or reducing the picture, the screen may be display unnatural picture.
Screen Position
- You are available to this function after adjusting Zoom In/Out.
Cinema
-When you watch the movie, this function adjusts the set to the best picture appearance.
-This function works in the following mode:
TV, AV1, AV2,
NR (Noise Reduction)
-You can select 3D NR or MPEG NR to reduce the picture noise which may appear on the screen during watching the TV.
-This function is not available for use in RGB[PC[, HDMI[PC] mode.
-3D NR is not available for use in RGB, HDMI, Component[DTV] mode.
Initializing (Reset to original factory value)
This function operates in current mode.
To initialize the adjusted value.
•You can initialize Phase, Clock,
Teletext (option)
-Teletext (or TOP text) is an optional function, therefore only the set with the teletext system can receive the teletext broadcast.
-Teletext is a free service broadcast by most TV stations which gives
-The teletext decoder of this set can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
Teletext Language Selection
1.Press the MENU button and then use D / E button to select the SPECIAL menu.
2.Press the G button and then use D / E button to select
Language.
3.Press the G button and then use F / G button to select
Teletext Language.
4.Press the D / E button to select the required language.
5.Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.Please select your local teletext language.
b.If you don't, the teletext may not appear correctly on the screen.
Switch on/off
*button to switch to teletext.
•The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are dis-
played on the screen headline. The first page number indi- cates your selection, while the second shows the currentPress the TEXT/
page displayed.
Press the TEXT/* button to switch off teletext.
Owner’s Manual 21