LG Electronics 26LC7D owner manual Screen Setup for PC mode Overview, Press the Enter button

Screen Setup for PC mode

Overview

When the RGB input of the set is connected to a PC output, select the RGB-PC as the main input mode.

When HDMI/DVI connect to PC output and select HDMI/DVI input, this function is used.

After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.

When you change the resolution, select the proper resolution in pre- sent input to see the best picture appearance.

Adjustment for screen Resolution, Position, Size, and Phase

1Press the ADJUST button and then use D or E button to select Resolution, Position, Size, or Phase.

2Press the ENTER button and then use D E F G button to make appropriate adjustments.

■The Phase adjustment range is -16 ~ +16. In HDMI/DVI-PC mode, Phase is not available.

■The Size adjustment range is -30 ~ +30. In HDMI/DVI-PC mode, Size is not available.

3Press the ENTER button.

Initializing (Reset to original factory values)

To initialize the adjusted values

INPUT			MODE
TV	POWER		TV
INPUT			DVD
RATIO			VCR
COMP1	HDMI1	RGB-PC	SIMPLINK
PICTURE	SOUND	ADJUST	*

CCSAP

MENU

EXITTIMER

Resolution	1024 x 768
Position	1280 x 768
	1360 x 768
Size	1366 x 768
Phase
Reset
		Close	D	Move		Ok
	MENU		F EG
				1	2	3

Resolution This function allows you select resolution of XGA/WXGA.

Position This function is to adjust picture to left/right and up/down as you prefer.

Size	This function is to minimize any ver-
	tical bars or stripes visible on the
	screen background. And the hori-
	zontal screen size will also change.
Phase	This function allows you to
	remove any horizontal noise and
	clear or sharpen the image of char-
	acters.

EXTERNAL EQUIPMENT SETUP

1Press the ADJUST button and then use D or E button to select Reset.

2Press the ENTER button and then use F or G button to select Yes.

Resolution

Position

Size

Phase

Reset

Initialize Settings

Yes No

D

MENU Close F G Move Ok

E

3 Press the ENTER button.

1 2 3

27