LG Electronics 26LC7D owner manual External Equipment Setup, HD Receiver Setup, How to use

EXTERNAL EQUIPMENT SETUP

■To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■This part of EXTERNAL EQUIPMENT SETUP mainly use picture for the 42 inches models.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

When connecting Component cable 1. How to connect

			VIDEO	AUDIO
1	Connect the video outputs (Y, PB, PR) of the digital set
	top box to the COMPONENT IN VIDEO 1 jacks on
	the set. Match the jack colors
	(Y = green, PB = blue, and PR = red).
2	Connect the audio output of the digital set-top box to
	the COMPONENT IN AUDIO 1 jacks on the set.	OPTICAL
		DIGITAL AUDIO	S-VIDEO VIDEO	(MONO)
		OUT		AUDIO
			1	2

2. How to use

COMPONENT IN AV OUT AV IN 1

EXTERNAL EQUIPMENT SETUP

■Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box. operation)

■Select Component 1 input source by using the INPUT button on the remote control.

■If connected to COMPONENT IN2 input, select Component 2 input source.

Y PBPRL R

Signal	Component 1/2	HDMI1/DVI,
		HDMI2
		No
480i	Yes
480p	Yes	Yes
720p	Yes	Yes
1080i	Yes	Yes
1080p	Yes	Yes

17