ADJUSTMENT INSTRUCTION
1. Application Range
This specification sheet is applied to all of the LCD TV with LD2AC chassis.
2.Designation
(1)The adjustment is according to the order which is designated and which must be followed, according to the plan which can be changed only on agreeing.
(2)Power adjustment : Free Voltage.
(3)Magnetic Field Condition: Nil.
(4)Input signal Unit: Product Specification Standard.
(5)Reserve after operation : Above 5 Minutes (Heat Run)
Temperature : at 25 °C ± 5 °C
Relative humidity : 65 ± 10 %
Input voltage : 220 V, 60 Hz
(6)Adjustment equipments: Color
(7)Push the "IN STOP" key - For memory initialization.
Case1 : Software version up
1.After downloading S/W by USB , TV set will reboot automatically.
2.Push
3.Push “Power on” key.
4.Function inspection
5.After function inspection, Push
1.When TV set is entering on the assembly line, Push
2.Push “Power on” key for turning it on.
→If you push “Power on” key, TV set will recover
channel information by itself.
3.After function inspection, Push
3.Main PCB check process
▪APC - After
*Boot file Download
(1)Execute ISP program "Mstar ISP Utility" and then click "Config" tab.
(2)Set as below, and then click "Auto Detect" and check "OK" message.
If "Error" is displayed, check connection between computer, jig, and set.
(3)Click "Read" tab, and then load download file(XXXX.bin) by clicking "Read"
(1)
filexxx.bin
(4)Click "Connect" tab. If "Can't" is displayed, check connection between computer, jig, and set.
(2)
(3)
Please Check the Speed : To use speed between from 200KHz to 400KHz
(5)Click "Auto" tab and set as below.
(6)Click "Run".
(7)After downloading, check "OK" message.
(4)
filexxx.bin
(5)
(7) | OK |
(6)
*USB DOWNLOAD
(1)Put the USB Stick to the USB socket.
(2)Automatically detecting update file in USB Stick.
-If your downloaded program version in USB Stick is Low, it didn't work. But your downloaded version is High, USB data is automatically detecting.
(3)Show the message "Copying files from memory".
(4)Updating is starting.
(5)Updating Completed, The TV will restart automatically.
(6)If your TV is turned on, check your updated version and Tool option. (explain the Tool option, next stage)
*If downloading version is more high than your TV have, TV can lost all channel data. In this case, you have to channel recover. if all channel data is cleared, you didn’t have a DTV/ ATV test on production line.
* After downloading, have to adjust Tool Option again.
(1)Push
(2)Select "Tool Option 1" and push "OK" key.
(3)Punch in the number. (Each model has their number)
Copyright © | LG Electronics. Inc. All rights reserved. | - 9 - | LGE Internal Use Only |
Only for training and service purposes |
|
| |