Installation
External Eq uipment Con nect,iions
- For optimum picture quality, adjust antenna direction.
Connecting to an inside Antenna _tup
-Typical wall antenna jack used in apa_ment bui!dings, _nnect the antenna cable as shown below.
Turn CloCkwise t° tightenl
Converter
-If you have a 75_ round cable, insert the bronze wire and then tighten the conn_tion nut ff you have a 300.Q flat wire, connect the twisted wire to the antenna converter and then connect the converter to the antenna jack on the TV.
-ff using 7&Q round cable, do not bend the bronze wire. It may cause _or picture quality.
Connecting | to an Outdoor Antenna | Setup |
|
|
This type of antenna is commonly used in single family dwellings |
| |||
| VHF Antenna |
|
| |
|
| Turn c_ockwise to tighten. |
| |
| UHF |
|
|
|
| Antenna | 75_. Round Cable | Co |
|
|
| 300£_Flat Wire |
|
|
Single | Family Home |
| Antenna | Antenna Jack |
|
|
| Converter |
|
- In _or signal areas, to get better picture qual- ity, install a signal amplifier to the antenna as s_wn to the righL
-if sigr,al n_s to be split for two TVs, use an antenna signal splitter for connection,,
12