Installation
External EQuipment Connections Continued
Connect the audio/video output jacks on the external A/V _uipment to the corresponding input jacks on the TV. When connecting the TV to external A/V equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)..
Viewing Setup
1.Turn on the external A/V equipment.
2.Use the INPUT button on the remote con-
trol to sel_t Video.
3.Operate the corresponding external quip- ment. Refer to external equipment operat- ing guide.
1.Connect the DVD video ou_uts to the COMPONENT (Y, PB, PR) jacks and connect the DVD audio outputs to the AUDIO jacks.
2.If your DVD only has an SoVideo output jack, connect this to the
n_t the DVD audio ou_uts to the AUDIO INPUT jacks on the TV.
NOTE: If your DVD player does not have component video output, use
Viewing Setup
1.Turn on the DVD player, insert a DVD.
2.Use the INPUT button on the remote control to select
3.Refer to the DVD player's manual for operating instruc- tions. (If connected to SoVIDEO on rear panel, select the Video external input source.)
•Component Input _rts
To get better picture quality, connect a DVD | player | to |
|
| DVD | |
the component input ports as shown below. |
|
|
|
|
| |
Component | ports |
|
|
|
|
|
of the TV | _.._el |
|
|
| RG_DTV | |
|
|
|
|
| ||
Video output | ports | !5LC1 | R* | 480i/480p | Yes | Yes |
of DVD player | 20LC1 R* | 480i/480p | Yes | No | ||
|
| |||||
14