Video function does not worko

TroubleshootingCh_klist

	• Check to see if there is any object between the product and the
_ r_	remote control causing	obstruction.
	_nti-ol	with correct _larity (+ to +, -to -)?
_='ft	° Are batteries ins_llod
	w_
	° Correct remote operating mode set: TV, VCR etc.?

• Install new batteries.

Power is suddenly

turned off

The

No picture & No sound

Picture ap_ars slowly after

switching on

No or poor color

or poor picture

* Is the sleep timer set?

° Check the power control settings. Power interrupted

. No broadcast on station tunod with Auto off activatod.

•Check whether the product is turned on.

•Try another channel. The problem may be with the broadcast. ° Is the _wer cord insertod into wall power outlet?

° Check your antenna direction and/or location,

° Test the wall power outlet, plug another product's _wer cord into the outlet where the product's power cord was pluggod in.

•This is normal the image is mutod during the product startup

pr_ess. Please contact your service center, if the picture has not appeared after five minutes.

•Adjust Color in menu option.

•Keep a sufficient distance between the product and the VCR.

°Try another channeL. The problem may'be with the broadcasL

°Are the vid_ cables installed properly?

• Activate any function to restore the brightness of the picture.

Horizontal/vertical

• Check for I_al interference such as an electrical appliance

or power tool..

°Station or cable product experiencing problems, tune to another station. - Station signal is weak, reorient antenna to receive weaker s_tion.

• Check for sources of possible interference.

°Ch_k antenna (Change the direction of the antenna).