Memorizing the Channels
This unit can automatically find all channels available through antenna or cable inputs, and store them in memory. Note: Be sure to select the TV source before operation.
Selecting the Tuning Band
Before your TV can memorize the available channels, you must specify the type of signal source that is connected to the unit. (i.e., an antenna or cable system)
1
2
3
4
5
Press MENU to display the menu main page.
Press 5or 6 repeatedly to select Setup menu.
Press OK or4 to access the submenu.
Press 5or 6 to select Tuning Band item.
Press OK or 4 to select the Tuning Band.
Air, Cable, Cable HRC, Cable IRC and Cable Auto
If using antenna, select Air;
Video
Audio
Setup
Feature
can be selected.
Tuning Band | Air |
DTV Signal
Auto Ch Search
Add On Ch Search
Manual Ch Set
Channel Labels
To Move OK To Select Exit To Exit
If using cable, select one of Cable/Cable HRC/Cable IRC/Cable Auto according to your local area’s cable system. Normally please select Cable Auto. (For further band information, contact your cable service provider.)
Auto Channel Search
1 Navigate to the Setup
Press OK or4to begin the auto channel search.
2 The unit will automatically search for all available TV/DTV (if using antenna), CATV/CADTV (if using cable) program.
Video
Audio
Setup
Feature
Tuning Band | Air |
DTV Signal
Auto Ch Search
Add On Ch Search
Manual Ch Set
Channel Labels
To Move OK To Select Exit To Exit
Note: if you want to stop the | Autoprogram Menu |
| Not Found | |
| NTSC Channel 12 |
| ||
Add On Channel Search | Analog Channels Found | 10 | ||
0 | ||||
Digital Channels Found | 25 | |||
After initial auto channel search, you can make use of Add On | Progress (%) |
|
Channel Search option to search for new programs and add them to |
|
|
|
the program list. |
|
|
|
1 Navigate to the Setup | Video | Tuning Band | Air |
DTV Signal |
| ||
Search. |
| Auto Ch Search |
|
|
|
| |
Press OK or4to begin the add on channel search. | Audio | Add On Ch Search |
|
|
|
| |
2 The unit will automatically search for new programs and add them |
| Manual Ch Set |
|
to the program list. | Setup | Channel Labels |
|
|
|
| |
Note: If you want to stop the search, press EXIT button. | Feature | To Move OK To Select Exit To Exit |
Manual Channel Set
After setting channels into memory, you can add or delete channels from the default channel list as follows:
1
2 Press OK or 4to open Manual Channel Set Menu sub-menu.
3 Use 5 or 6 button to select a channel, then press the OK button to add or delete the channel.
4 Press EXIT button to exit.
Now when you use CH+/- buttons to cycle among the channels, the deleted channels can not be selected.
Video
Audio
Setup
Feature
Tuning Band | Air |
DTV Signal
Auto Ch Search
Add On Ch Search
Manual Ch Set
Channel Labels
To Move OK To Select Exit To Exit
18