Operations in TV mode Channel Preset

CHANNEL SETTING

Auto search

<LEFT> or <RIGHT> key to change

1.Press MENU button repeatedly to display CHANNEL SETTING menu.

2.Press CH5or CH6button to select item.

3.Press VOL+ or VOL- button to confirm or adjust selected item.

Enter into CHANNEL SETTING menu and select Source item.

Press VOL- or VOL+ button to select Antenna or Cable.

Antenna: If using a VHF/UHF antenna (2-68).

Cable: If using Cable TV (2-125).

CHANNEL SETTING

Auto search

<LEFT> or <RIGHT> key to change

Please enter into CHANNEL SETTING menu and select Auto Search item.

Press VOL- or VOL+ button to start Auto Search and all active programs will be memorized.

During the process of Auto Search, pressing MENU button will stop Auto Search.

Antenna Auto searching

28VHFL

Press <Menu> to escape

After auto search, you can add or skip channels as follows:

Select a channel to be added or skipped by direct channel select buttons.

Enter into CHANNEL SETTING menu and select Skip item.

Press VOL- or VOL+ button to select On or

Skip On: To skip the current channel.

Skip Off: To add the current channel.

CHANNEL SETTING

Auto search

<LEFT> or <RIGHT> key to change

*To exit the menu, press ENTER button.

In area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning.

Use 0~9 digit buttons or CH5/6 buttons to	CHANNEL SETTING
	Auto search
select the desired channel, then enter into	Source	Antenna
	Current Prog	12
CHANNEL SETTING menu and select
	Skip	ON
Auto fine tune item. Press VOL+ button to	Auto fine tune	OFF
	<LEFT> or <RIGHT> key to change
select ON to activate the auto fine tune.