Audiovox FPE3000 owner manual

Page 6

This TV set operates on power of 120V, 60Hz. You must not use a power supply of any

other type.

When relocating the product placed on a trolley, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley.

The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product. Power- supply cords should be routed so that they are not likely to be walked on or snagged by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.

If the power cord or the plug is damaged contact a qualified service department for service.

Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.

High Voltage exists in this TV set. Do not remove the cover.

In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.

Don't try to push anything into the cabinet or place any vessel with water on the TV set.

For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

6

Image 6
Contents LCD TV Contents Page Page Important Safety Cautions Page Page Identification of controls Back Remote Control Battery installation Effective remote rangeAntenna connection Cable TV Catv ConnectionInstallation Power connectionConnecting video/audio equipment ANTConnecting DVD player and speakers To speakerConnecting YPbPr terminals Connecting VGA interface HDTElevation adjustment Menu overview in TV mode Menu IntroductionPress to switch between Caption, text and TV Turning On Turning On/Off / Selecting input signalSelecting input signal Turning OffOperations in TV mode Channel Preset Use CH5/6 button Channel SelectUse 0-9 digit buttons Use previous channel buttonUsing Still button Picture adjustmentAdjusting picture Using AUTO.ADJ buttonAdjusting Volume Sound adjustmentAdjusting Sound Muting the soundSetting OSD Language System setupTo enter into Setup menu Color systemSetting OSD position Setting OSD BackgroundSetting Scaler mode Timer setting Use SLP buttonUse CLK button Closed captions CCD settingTo enter into CCD and Vchip Settings menu CCD backgroundChip setting To enter into Rating Setting menuMovie Rating setup TV Rating setup Changing the passwordAdjusting Color temperature Adjustment in YPbPr modeTo enter into YPbPr mode Adjusting horizontal / vertical positionPC signal format Adjustment in PC modeTo enter into PC mode Use AUTO. ADJ buttonAdjusting brightness and contrast Adjusting phase and frequencyPage Page Page Page Page Page Specifications Display FeaturesPage Printed Recycled Paper