Audiovox FPE3000 owner manual Adjustment in PC mode, To enter into PC mode, PC signal format

Page 33

Adjustment in PC mode

PC

To enter into PC mode

Repeatedly press button on the remote control or SOURCE button on the set's panel until the screen display PC, which indicates that the set is in PC mode.

PC signal format

Please connect VGA input and be sure that there is VGA input signal. The signal format should be one of the follows:

640X480 @60Hz

800X600 @60Hz

1024X768 @60Hz 1280X768@60Hz

We recommend you to use 1024X768 @60Hz (4:3) or 1280X768@60Hz (16:9) so that the set can obtain the best picture.

Use AUTO. ADJ button

When PC signal format changes or when you switch to PC mode by button, the set corrects picture automatically including frequency and phase to obtain the best display. During the process of auto correction, all buttons on the remote control and set's panel do not work until this process is finished.

When the set displays some signal formats that are nonstandard and can not adjust by itself to the best displaying status, now you can press AUTO.ADJ button to correct the displaying again.

33

Image 33
Contents LCD TV Contents Page Page Important Safety Cautions Page Page Identification of controls Back Remote Control Effective remote range Battery installationCable TV Catv Connection Antenna connectionPower connection InstallationANT Connecting video/audio equipmentTo speaker Connecting DVD player and speakersConnecting YPbPr terminals HDT Connecting VGA interfaceElevation adjustment Menu Introduction Menu overview in TV modePress to switch between Caption, text and TV Selecting input signal Turning On/Off / Selecting input signalTurning On Turning OffOperations in TV mode Channel Preset Use 0-9 digit buttons Channel SelectUse CH5/6 button Use previous channel buttonAdjusting picture Picture adjustmentUsing Still button Using AUTO.ADJ buttonAdjusting Sound Sound adjustmentAdjusting Volume Muting the soundTo enter into Setup menu System setupSetting OSD Language Color systemSetting OSD position Setting OSD BackgroundSetting Scaler mode Timer setting Use SLP buttonUse CLK button To enter into CCD and Vchip Settings menu CCD settingClosed captions CCD backgroundChip setting To enter into Rating Setting menuMovie Rating setup Changing the password TV Rating setupTo enter into YPbPr mode Adjustment in YPbPr modeAdjusting Color temperature Adjusting horizontal / vertical positionTo enter into PC mode Adjustment in PC modePC signal format Use AUTO. ADJ buttonAdjusting phase and frequency Adjusting brightness and contrastPage Page Page Page Page Page Display Features SpecificationsPage Printed Recycled Paper