Preparation, Antenna Connection | Audiovox FPE2006 specs

Audiovox FPE2006 manual Preparation, Antenna Connection

Preparation (continued)

Antenna Connection

CABLE TV (CATV) CONNECTION

A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. Terminal.

Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.

This converter/descrambler is necessary for normal viewing of the scrambled channels. For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below. Please

RF switch (not supplied)

OUT

Two-set

signal

splitter Cable TV Line (not

supplied)

Cable TV converter/ descrambler (not supplied)

“A” position on the RF switch (not supplied) : You can view all unscrambled channels by using the TV’s channel keys.

“B” position on the RF switch (not supplied) : You can view the scrambled channels via the

Consult your Dealer or Service Center for the type of splitter, RF switch or combiner that

ANTENNAS

The antenna requirements for good color television reception are more important than those for black

&white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various

1.A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied).

2.A 300-ohm system is a flat “twin-lead” cable that can be

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)