Beko 37WLU550FHID manual How To Connect CI Common Interface Card, To Insert A Ci Card

Page 31

9.8- How To Connect CI (Common Interface) Card

9.8- How To Connect CI (Common Interface) Card

1- To wiew the scrambled (pay) services in digital TV mode.

TO INSERT A CI CARD

(NOTE: The card on its own cannot be used on this tv. A cam must be purchased and a the card is inserted into the cam. The cam / card holder is then inserted into the ci slot on the tv.)

Insert the Cam / card holder card into the slot in the direction of the arrow until it fully located.

Side or Rear view of TV

TO REMOVE A CI CARD

When removing the CI card, make sure you pull out the Cam complete with the card fitted.

This function enables you to watch the scrambled services (pay services) in some channels. If you remove the CI Module, you can only watch the available non scrambled digital programmes.

2- Press the Standby button on the remote to turn on the TV.

3- Press the INPUT button on the remote to display the Source List. Use the Up/ Down buttons to select DTV, and press the OK button.

4- If the CI card is inserted properly, the CI MODULE will briefly be displayed on screen, The contents are dependent on the CAM provider in you country.

29

Image 31

Contents Operation Instructions INTEGRATED DIGITAL FULL HD COLOUR TELEVISIONS 37WLU550FHIDTABLE OF CONTENTS 1 Important Information 1.1-Cleaning the screen and cabinet1.2-Disposing of your TV at the end of service life 1.3-Superior features of your integrated digital television1.5-Changing the plug 2.1-Special Features 2 Features of your new television4 MAKE SURE that all 3 Important Safety InstructionsUnplug the TV in order to disconnect it from mains power AC power cable must be within easy reachThe socket into which you plug in the 18 Wipe the TV cabinet Initial power on and performing settings 4.1-Aerial connection 4.2-Powering on your TV and the initial use4 Start 4.3-Batteriesor or or 5 Your new television5.1-TV Control Panel 5.2-Rear and Side External ConnectionsD Digital Mode Only 5.3-Remote Control6.1.1-Temporary on/off STAND-BY 6 Performing the initial power-on settings6.1-TV controls 6.1.4-Performing the Volume setting6.3-Performing Digital Tunings 6.2-Turning on the TV and Setting the Channels6.3.1-Automatic Tuning of Channels and Storing in the Memory You will need to rescan the digital TV channels 6.3.2-Manual tuning of channels and storing in the memory6.3.3-First Time Installation ADDITIONAL INFORMATION6.3.4.2-Creating favorite channels list 6.3.4-Program Table6.3.5-Electronic TV Guide EPG select Subtitling Language 6.3.6-Digital Features6.3.6.1-Language Settings 6.3.6.2-Access Control6.3.6.3-User Interface Options 6.4-Performing Analog Tunings6.3.6.4-Timers 6.4.1-Automatic tuning of channels and storing in the memory6.4.2.2-If you do not know the channel number 6.4.2-Manual tuning of channels and storing in the memory6.4.3-Fine Tuning 6.4.2.1-If you already know the channel number6.4.4.4-To name the channels 6.4.4.1-Switching the locations of the stored channels6.4.4.2-Deleting a stored channel 6.4.4.3-Skipping a stored channel7.1.5-Headphones 7 Settings of Your New Television7.1- Sound Menu Settings 7.1.4-AVL Automatic Volume Limiting7.2.2-DNR Noise reduction 7.2-Picture Menu Settings7.1.7-Equalizer 7.2.1-Picture Menu7.2.9-Picture Format 7.2.6-Backlight7.2.7-MPEG NR 7.2.8-Picture Smart7.2.9.7-Panorama 7.3-Features Menu Settings7.3.1-Timer 7.2.9.6-Subtitle7.3.4-Auto Scart 7.4-Other Picture Features7.4.3-Using PIP Feature Picture in Picture 7.4.3.3-Switching the locations of the Main screen and PIP screen8.3-Teletext image in the TV picture MIX 8 Teletext8.1-Entering the Teletext Mode 8.2-Page Selection8.10-Fastext 8.7-Temporary TV Picture UPDATE8.8-Question - Answer Button REVEAL 8.9-Clock9.2-Connecting an external equipment via Scart connection 9 External Equipment Connections9.1-Headphone Connection 9.4-Connecting external equipment via S-Video connectionGAME CONSOLE 9.3-Connecting external equipment via AV connectiondevice connected using the Phono input, select OK button. Your TV will switch to the selected9.6.1-HDCP HD Copy Protection 9.6-Connecting an external equipment via HDMI connectionFull HD 9.7-PC VGA connection 9.7.2-Switching to the PC mode9.7.3-PC Setting 9.7.4-AUTOCONFIGURATIONTO INSERT A CI CARD 9.8- How To Connect CI Common Interface CardTO REMOVE A CI CARD Possible cause 10 Help and tipsSolution FailureProgram memory Analog 11 Technical specifications chartGeneral technical specifications Power supply AC12 MAIN UK TRANSMITTER STATIONS Important notes 13 Guarantee - TelevisionWhat is covered? What is not covered?0845 600 13 HOW TO OBTAIN SERVICESpecial Note V7P.801