Beko 37WLU550FHID manual Help and tips, Failure, Possible cause, Solution

Page 32
10Help and tips

10Help and tips

Failure

Possible cause

Solution

 

 

 

 

Is the power cord connected to the

Check the power cord.

 

mains supply?

The television does not function

 

Is the On/Off button on?

Check if the On/Off button is on.

 

 

 

 

 

Is the aerial cable connected?

Check the aerial cable.

 

 

 

 

Aerial may be affected by two

Try disconnecting one of the devices.

 

connected external devices.

Poor picture quality (analogue TV)

 

 

 

It may need fine tuning.

Perform fine tuning.

 

 

 

 

 

Picture settings are not correct.

Adjust Brightness, Contrast and

 

Colour.

 

 

 

Channel setting

Perform automatic, manual channel

Shadow and reflection in the

setting or fine tuning.

 

picture.(analogue TV)

Aerial misaligned

Check aerial direction

 

 

 

 

 

Is there any damage to the aerial or

Check and replace the aerial and or

No picture

cable?

cable.

Are you sure you pressed the correct

Press PR+ or PR- button to turn on

 

 

button on your remote control?

the TV.

 

 

 

 

Colour intensity level is at the lowest

Lighten the colour.

 

setting.

 

No colour.

 

 

 

 

 

 

Problem in channel broadcasting.

Test with another channel.

 

 

 

 

Television channel (no teletext) or

Test another channel for fine tuning

 

and shadowy pictures

No or defective teletext

 

Very weak signal

Check the aerial system.

 

 

 

 

 

Temporary sound mute may be on

Try pressing the mute button

No sound

 

 

Is the sound turned down?

Turn on the volume with Vol + button.

 

 

 

 

 

Are the batteries correctly placed?

Place the batteries correctly.

 

 

 

Remote control does not work

Are batteries exhausted?

Replace the batteries with new ones.

 

 

 

 

Is there any obstacle between the

If yes, remove it.

 

remote control and television?

 

 

Picture is not visible after turning

Child lock is active.

Disable the child lock.

on the TV

 

 

If your television does not work properly even though you tried the above mentioned solutions, try turning it on and off again. If you cannot start your television even though you have applied all noted methods, refer to the dealer from where you purchased the product. Never attempt to repair a faulty device yourself.

30

Image 32
Contents INTEGRATED DIGITAL FULL HD COLOUR TELEVISIONS 37WLU550FHID Operation InstructionsTABLE OF CONTENTS 1.1-Cleaning the screen and cabinet 1.2-Disposing of your TV at the end of service life1.3-Superior features of your integrated digital television 1 Important Information1.5-Changing the plug 2 Features of your new television 2.1-Special Features3 Important Safety Instructions 4 MAKE SURE that allThe socket into which you plug in the AC power cable must be within easy reachUnplug the TV in order to disconnect it from mains power 18 Wipe the TV cabinet 4.1-Aerial connection 4.2-Powering on your TV and the initial use 4 Start4.3-Batteries Initial power on and performing settings5 Your new television 5.1-TV Control Panel5.2-Rear and Side External Connections or or or5.3-Remote Control D Digital Mode Only6 Performing the initial power-on settings 6.1-TV controls6.1.4-Performing the Volume setting 6.1.1-Temporary on/off STAND-BY6.3.1-Automatic Tuning of Channels and Storing in the Memory 6.2-Turning on the TV and Setting the Channels6.3-Performing Digital Tunings 6.3.2-Manual tuning of channels and storing in the memory 6.3.3-First Time InstallationADDITIONAL INFORMATION You will need to rescan the digital TV channels6.3.5-Electronic TV Guide EPG 6.3.4-Program Table6.3.4.2-Creating favorite channels list 6.3.6-Digital Features 6.3.6.1-Language Settings6.3.6.2-Access Control select Subtitling Language6.4-Performing Analog Tunings 6.3.6.4-Timers6.4.1-Automatic tuning of channels and storing in the memory 6.3.6.3-User Interface Options6.4.2-Manual tuning of channels and storing in the memory 6.4.3-Fine Tuning6.4.2.1-If you already know the channel number 6.4.2.2-If you do not know the channel number6.4.4.1-Switching the locations of the stored channels 6.4.4.2-Deleting a stored channel6.4.4.3-Skipping a stored channel 6.4.4.4-To name the channels7 Settings of Your New Television 7.1- Sound Menu Settings7.1.4-AVL Automatic Volume Limiting 7.1.5-Headphones7.2-Picture Menu Settings 7.1.7-Equalizer7.2.1-Picture Menu 7.2.2-DNR Noise reduction7.2.6-Backlight 7.2.7-MPEG NR7.2.8-Picture Smart 7.2.9-Picture Format7.3-Features Menu Settings 7.3.1-Timer7.2.9.6-Subtitle 7.2.9.7-Panorama7.4-Other Picture Features 7.4.3-Using PIP Feature Picture in Picture7.4.3.3-Switching the locations of the Main screen and PIP screen 7.3.4-Auto Scart8 Teletext 8.1-Entering the Teletext Mode8.2-Page Selection 8.3-Teletext image in the TV picture MIX8.7-Temporary TV Picture UPDATE 8.8-Question - Answer Button REVEAL8.9-Clock 8.10-Fastext9.1-Headphone Connection 9 External Equipment Connections9.2-Connecting an external equipment via Scart connection 9.3-Connecting external equipment via AV connection device connected using the Phono input, selectOK button. Your TV will switch to the selected 9.4-Connecting external equipment via S-Video connectionGAME CONSOLEFull HD 9.6-Connecting an external equipment via HDMI connection9.6.1-HDCP HD Copy Protection 9.7.2-Switching to the PC mode 9.7.3-PC Setting9.7.4-AUTOCONFIGURATION 9.7-PC VGA connectionTO REMOVE A CI CARD 9.8- How To Connect CI Common Interface CardTO INSERT A CI CARD 10 Help and tips SolutionFailure Possible cause11 Technical specifications chart General technical specificationsPower supply AC Program memory Analog12 MAIN UK TRANSMITTER STATIONS 13 Guarantee - Television What is covered?What is not covered? Important notesSpecial Note 13 HOW TO OBTAIN SERVICE0845 600 V7P.801