Beko 37WLU550FHID Picture Menu Settings, Equalizer, DNR Noise reduction, Colour Temperature, Tint

Page 21
7.1.6.2-Dialog Clarity

7.1.6.2-Dialog Clarity

This feature enhances the understandability of the speeches in dialogues.

Note:When the SRS is set to ON, AVL and EQUALIZER functions will automatically be set to Off.

7.1.7-Equalizer

Select the EQUALIZER tab in the Sound menu and confirm with the OK button. The Equalizer menu is displayed.

EQUALIZER

MUSIC

SPORTS

CINEMA

SPEECH

USER

7.1.7-Equalizer7.2-Picture Menu SettingsCHANGE 7.2.1-Picture MenuBACK

Using the Left/Right, Up/Down movement buttons, you may select either one of the preset MUSIC, SPORTS, CINEMA and SPEECH options which enhance the sound effect depending on the feature of the program you are watching or the USER option which you can adjust as you desire. To adjust the User option, select USER and press the Right movement button. You can adjust the frequency levels with the Up/ Down movement buttons. You can select one of the 120Hz, 500Hz, 1.5KHz, 5KHz and 10KHz frequency bands with Right and Left movement buttons. Press the MENU button to store the settings and exit the user option. You may exit the equalizer menu by pressing the MENU button again.

Note: You can select the equalizer options directly by pressing the (7.2.2-DNR (Noise reduction)) button on your remote control.

7.2-Picture Menu Settings

7.2.1-Picture Menu

You can perform other picture settings by entering the Picture menu. For this, press the MENU button on your remote control. Select PICTURE by pressing the Up/Down movement buttons from the main menu and press the OK button. The Picture menu will be displayed.

PICTURE

 

BRIGHTNESS

 

CONTRAST

 

COLOUR

 

SHARPNESS

 

DNR

HIGH

COLOUR TEMP.

NORMAL

MPEG NR

LOW

ACTIVE CONTRAST

OFF

BACKLIGHT

 

CHANGE

BACK

You can select the desired setting by pressing the Up/Down movement buttons and adjust their levels with Right/ Left movement buttons. You can adjust

BRIGHTNESS, CONTRAST, COLOUR and SHARPNESS levels as you desire. The changes you have made in the picture settings will be stored in the memory without requiring any other operations.

7.2.2-DNR (Noise reduction)

You may reduce interference and noise formed in the picture by using this feature. Select DNR tab in the Picture menu with the Up/Down movement buttons to activate this feature and select one of the OFF, LOW, MID or HIGH options with Left/Right movement buttons.

7.2.3-Colour Temperature

You can adjust the colour temperature with this feature. Move to the Colour Temperature tab in the Picture menu by pressing the up/down movement buttons and select WARM, COOL or NORMAL by pressing the right/left movement buttons.

7.2.4-Tint

When NTSC video is input via Scart, you may make Hue settings. The tint option is not seen in the menu when you have not input this type of a video. When a NTSC video is connected via the Scart, this option becomes active and it is available in the menu.

7.2.5-Active Contrast

This feature allows making brightness settings according to the picture. A brighter or dimmer picture can be sent to the screen according to the brightness level of the picture. Thus, a wider effect is obtained in terms of contrast.

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Operation Instructions INTEGRATED DIGITAL FULL HD COLOUR TELEVISIONS 37WLU550FHIDTABLE OF CONTENTS 1.2-Disposing of your TV at the end of service life 1.1-Cleaning the screen and cabinet1.3-Superior features of your integrated digital television 1 Important Information1.5-Changing the plug 2.1-Special Features 2 Features of your new television4 MAKE SURE that all 3 Important Safety InstructionsAC power cable must be within easy reach Unplug the TV in order to disconnect it from mains powerThe socket into which you plug in the 18 Wipe the TV cabinet 4 Start 4.1-Aerial connection 4.2-Powering on your TV and the initial use4.3-Batteries Initial power on and performing settings5.1-TV Control Panel 5 Your new television5.2-Rear and Side External Connections or or orD Digital Mode Only 5.3-Remote Control6.1-TV controls 6 Performing the initial power-on settings6.1.4-Performing the Volume setting 6.1.1-Temporary on/off STAND-BY6.2-Turning on the TV and Setting the Channels 6.3-Performing Digital Tunings6.3.1-Automatic Tuning of Channels and Storing in the Memory 6.3.3-First Time Installation 6.3.2-Manual tuning of channels and storing in the memoryADDITIONAL INFORMATION You will need to rescan the digital TV channels6.3.4-Program Table 6.3.4.2-Creating favorite channels list6.3.5-Electronic TV Guide EPG 6.3.6.1-Language Settings 6.3.6-Digital Features6.3.6.2-Access Control select Subtitling Language6.3.6.4-Timers 6.4-Performing Analog Tunings6.4.1-Automatic tuning of channels and storing in the memory 6.3.6.3-User Interface Options6.4.3-Fine Tuning 6.4.2-Manual tuning of channels and storing in the memory6.4.2.1-If you already know the channel number 6.4.2.2-If you do not know the channel number6.4.4.2-Deleting a stored channel 6.4.4.1-Switching the locations of the stored channels6.4.4.3-Skipping a stored channel 6.4.4.4-To name the channels7.1- Sound Menu Settings 7 Settings of Your New Television7.1.4-AVL Automatic Volume Limiting 7.1.5-Headphones7.1.7-Equalizer 7.2-Picture Menu Settings7.2.1-Picture Menu 7.2.2-DNR Noise reduction7.2.7-MPEG NR 7.2.6-Backlight7.2.8-Picture Smart 7.2.9-Picture Format7.3.1-Timer 7.3-Features Menu Settings7.2.9.6-Subtitle 7.2.9.7-Panorama7.4.3-Using PIP Feature Picture in Picture 7.4-Other Picture Features7.4.3.3-Switching the locations of the Main screen and PIP screen 7.3.4-Auto Scart8.1-Entering the Teletext Mode 8 Teletext8.2-Page Selection 8.3-Teletext image in the TV picture MIX8.8-Question - Answer Button REVEAL 8.7-Temporary TV Picture UPDATE8.9-Clock 8.10-Fastext9 External Equipment Connections 9.2-Connecting an external equipment via Scart connection9.1-Headphone Connection device connected using the Phono input, select 9.3-Connecting external equipment via AV connectionOK button. Your TV will switch to the selected 9.4-Connecting external equipment via S-Video connectionGAME CONSOLE9.6-Connecting an external equipment via HDMI connection 9.6.1-HDCP HD Copy ProtectionFull HD 9.7.3-PC Setting 9.7.2-Switching to the PC mode9.7.4-AUTOCONFIGURATION 9.7-PC VGA connection9.8- How To Connect CI Common Interface Card TO INSERT A CI CARDTO REMOVE A CI CARD Solution 10 Help and tipsFailure Possible causeGeneral technical specifications 11 Technical specifications chartPower supply AC Program memory Analog12 MAIN UK TRANSMITTER STATIONS What is covered? 13 Guarantee - TelevisionWhat is not covered? Important notes13 HOW TO OBTAIN SERVICE 0845 600Special Note V7P.801
Top Page Image Contents