Beko 22WLP530HID operating instructions If you do not know the channel number, Fine Tuning

Page 17

Select the system in which you

would like to make the search

from the SYSTEM tab. Move into

CHANNEL tab by pressing the down

movement button. Press OK on your remote control to select “S” for cable channels and “C” for channels

received via the antenna. Move onto the PROGRAM NO tab and using the

number buttons enter the channel number in which you would like to have the channel stored. If the broadcast viewed on the screen is of your desired quality, first move onto the STORE tab with the down movement button to store in the memory the selection you have made and store the channel by pressing the Left or Right movement buttons. The prompt STORED will be displayed briefly. The channel will be stored according to the program number of your choice. You can tune and store in memory other channels the same way. In the event that you wish to exit the channel settings menu for any reason, simply press the EXIT button.

6.4.2.2-If you do not know the channel number

Press the MENU button. Move to the SETUP menu by pressing the Down movement button in the Main

Menu and confirm your selection with the OK button. Setup menu will be displayed. Select the system in

which you would like to make the search from the SYSTEM tab. Move

into CHANNEL tab by pressing the down movement button. Press OK on your remote control to select “S” for cable channels and “C” for channels

received via the antenna. Select SEARCH tab using the Up/Down movement buttons, and scan the channels in ascending order with Right movement button and in descending order with Left movement button. If the channel that is found is of your liking, select the STORE tab. Then store it in the memory by pressing the Right or Left movement buttons. Repeat the same procedure for other channels by selecting the program number of your choice from the PROGRAM NO tab. If the channel you found is not of the desired quality and requires Fine Tuning or if you would like to rename the channel, refer to the relevant sections.

6.4.3-Fine Tuning

If the channel you found is not of

the desired quality and requires Fine Tuning, then select the FINE TUNE tab by pressing the Down movement button in the Setup menu. Using the Left/Right movement buttons on your remote control, adjust the

broadcast displayed on the screen to your desired quality. Under normal circumstances, you will not require to use the Fine Tune function. The AFC values of your television will automatically adjust and lock themselves to the channel. However, you might need

it in case the television transmitters do not operate according to the standards. To store in the memory the settings you have made, select the Store tab and press the Right or Left movement button.

6.4.4-Program Table

Press the MENU button. Move to the PROGRAM TABLE tab by pressing the Down movement button in Main Menu and confirm your selection with the OK button. Program Table menu will be displayed.

PROGRAM TABLE

 

00

05

10

01 KANAL

06

11

02 KANAL

07

12

03

08

13

04

09

14

SKIP

 

NAME

MOVE

 

DELETE

SELECT

MENU BACK

15

Image 17
Contents Operating Instructions Table of Contents Important Information Special Features Features of your new televisionTV for the first time Important Safety InstructionsOperate your TV only Service requirementsNever operate your Page Start Powering on your TV and the initial useAerial connection BatteriesExternal Connections Your new televisionTV Control Panel Digital Mode Only Remote ControlTV controls Performing the initial power-on settingsPerforming Digital Tunings Turning on the TV and Setting the ChannelsAutomatic Tuning of Channels and Storing in the Memory Manual tuning of channels and storing in the memoryProgram Table First Time InstallationRED button when you are in Program Digital FeaturesCreating favorite channels list Electronic TV Guide EPGAccess Control Language SettingsTimers User Interface OptionsPerforming Analog Tunings If the channel you found is not Fine TuningIf you do not know the channel number Deleting a stored channel Switching the locations of the stored channelsSkipping a stored channel To name the channelsPicture Menu Settings Settings of Your New TelevisionSound Menu Settings Backlight CCE Color&Contrast EnhancementPicture Smart TintFeatures Menu Settings Teletext Question Answer Button Reveal Temporary TV Picture UpdateFastext Toptext optionalExternal Equipment Connections Connecting an external equipment via Scart connectionConnecting an external equipment via AV connection Hdcp Connecting an external equipment via Hdmi connectionHigh Definition HD-READY Side view of TVPC Setting Transition to the PC modePC connection Rear view of TVHelp and tips Failure Possible cause SolutionGeneral technical specifications Technical specifications chartMain UK Transmitter Stations What is covered? Guarantee TelevisionWhat is not covered? Important notesSpecial Note HOW to Obtain ServiceFQZ.801