Note: Since the use of certain functions in order to change the picture sizes for collective projection or commercial purposes (modifying the height and width etc.) will
be deemed an infringement of the picture’s copyright, legal proceedings can be carried out as required under relevant laws.
7.3-Features Menu Settings
Press the MENU button on your remote control. Select FEATURES tab by pressing the Up/Down movement buttons and press the OK button. The Features menu will be displayed.
FEATURES |
|
LANGUAGE | ENGLISH |
SLEEP TIMER | OFF |
PANEL LOCK | OFF |
DIGITAL FEATURES | OFF |
AKTIVE ANTENNA | |
DECODER | OFF |
AUTO SCART | ON |
CHANGE | MENU BACK |
You can select the titles for which you would like to perform an operation in this menu by using the Up/Down movement buttons.
Note: The DIGITAL FEATURES tab in the features menu is deactivated in Analog mode. It is activated in Digital mode only.
7.3.1-Off Time
Off Timer switches your television automatically to Standby Mode after the preset time has elapsed. You can adjust this time from 15 to 120 minutes with increments of 15 minutes. To activate this feature, select the Off Time tab and press Right/Left movement buttons to select the desired time.
7.3.2-Panel Lock
If this feature is turned On, the control buttons on your LCD television will be locked and will not function. They will be active again when the feature is turned Off.
7.3.3-Digital Features
You can adjust the Digital TV features from this menu. See page 12.
7.3.4-Active Antenna
When this feature is set to On, you can feed an external antenna to your television by the tuner of your television without needing any external source. Active Antenna output power is
7.3.5-Decoder
This feature is used to turn off the sound and picture output on the scart. If the scart output is required to be active (on) for an analog decoder or recorder device that will be connected via its socket, then switch to the channel to be recorder and set the DECODER option to ON from the FEATURES menu by means of right/left movement buttons. This value should be stored separately for each channel.
7.3.6-Auto Scart
When this feature is set to On and when you operate an external device that is connected to your LCD television via scart, TV will automatically switch to AV mode where the device is connected. When it is set to Off, your TV does not switch to the external device automatically.
19