General Description
Overview of front and side panel
The buttons on the
TV/AV
Toggles between all the available input sources.
MENU
Press to see an
VOL+/-
Press to increase or decrease the volume. In the
CH/
Press to change programs.
In the
Standby button
Press button to toggle between normal and standby mode.
REMOTE CONTROL SENSOR Aim the remote control towards this spot on the TV.
LED LOGO Light
Note:
1.The first touch sensor buttons, in addition to standby button, the other six button light; continue to operate, the corresponding indicator flashes.
2.Within 6 seconds without any operation, indicator turns off.
3.In order to avoid errors, the TV will go into standby mode after touching the standby button for 2 seconds. In standby mode, the standby indicator in the respiratory state (from bright to off and then turn on of the cycle), the other six lights were off.
4.When the sensor button indicators are off, touch button is equivalent to the first touch.
5.Please do not touch the buttons in rapid succession.
6.Turn on the TV, in addition to standby button, the other six indicator will cycle flash from left to right, suggesting that is turn on the TV; TV is turned on, indicators off.
11