Menu system instruction
Sound
1.Press MENU key to display the main menu on the screen.
2.Press / key to select "Sound" option.
3.Press key to enter "Sound" submenu.
4. You can also press the SOUND key on the remote |
|
|
| Sound Mode |
| Standard |
| |
control to select one of the sound settings. |
|
|
| Balance |
| 0 |
|
|
|
|
|
|
|
| |||
|
|
|
| Equalizer |
|
|
|
|
Sound Mode |
|
|
| Surround Sound |
| Off | ||
|
|
| HDMI Sound |
| HDMI | |||
You can select the type of the special sound effect |
|
|
| Auto Volume |
| Off | ||
to be used when watching a given broadcast. |
|
|
| SPDIF Mode |
| PCM | ||
|
|
|
|
|
|
|
| |
Your TV has five sound settings (“Standard”, “Music”, |
|
|
|
|
|
|
|
|
“Movie”, “Sports”, "User") that are preset at the factory. |
|
| Select | Menu:Return | ||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
1.Press / key to select "Sound Mode" option.
2.Press / key to select one sound mode.
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides live and full sound for movies.
Sports: Emphasizes bass over other sounds.
User: Selects your custom sound settings (See "User settings for Sound”).
User settings for SOUND(Equalizer)
1.Press ▲/▼ key to select a equalizer item.
2.Press OK or key to enter the equalizer subment. The sound settings can be adjusted to suit your user preferences.
1.Press ▲/▼ key to select a particular item.
2.Press / key to decrease or increase the value of a particular item.
Note: The adjusted values are stored according to the selected particular item.
Balance
Balance | 0 |
Equalizer | |
| Equalizer Adjust |
120Hz | 50 |
500Hz | 50 |
1.5Hz | 50 |
3.0KHz | 50 |
7.5KHz | 50 |
Select | Menu:Return |
If the volumes of the left speaker and the right speaker are not the same, you can adjust the "Balance" to suit your personal preference.
1.Press / key to select "Balance" option.
2.Press / key to decrease or increase the value of the item.
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
1.Press / key to select “Auto Volume" option.
2.Press / key to select “On” or “Off”.
21