Basic Operations
Menu Operation
1 Input Setup
Press INPUT key on the remote control to enter "INPUT SOURCE" menu. There are ten options for you to select: "TV", "AV1", "AV2","AV3", "Component", "VGA”, "HDMI1", “HDMI2", "HDMI3” and "USB”.
Use ▲/key to move the cursor to the input you desired and press OK key to confirm.
Note: "AV2" is multiplex with “Component".
2 Channels Selection
There are four ways to select channel:
1)Using number keys, and OK keys on the remote control to select channel directly.
Input Source
TV
AV 1
AV 2
AV 3
Component
VGA
HDMI1
HDMI2
HDMI3
USB
Select | OK Enter |
To select channel 90, press 9 
0 
.
When you use the number buttons, you can directly select channels that were either erased or not memorized.
2)Using CH/ key on the remote control or on your TV to select channel.
When you press the CH/ key, the TV changes channels in sequence. You will see all the channels that the TV has memorized.
You will not see channels that were either erased or not memorized.
3)Press RECALL key to return to previous channel, press it again to return to current channel.
To quickly switch between two channels that are far apart, tune to one channel, then use the number keys to select the second channel. Then use the RECALL button to quickly alternate between them.
RECALL is not activated if no channel has been changed after TV turning on.
4) Select channels from "All Channels List" or "Favorite Channels List". Press LIST/FAV key to display "Channel List / Favorite Channels List" menu.
3 Volume Adjustment and Mute Setup
Volume adjustment
Press VOL/ key on the remote control or on the TV to display "Volume" menu, adjust the volume of TV between 0 to 100 by using VOL/key:
To increase the volume, press VOL key;
To decrease the volume, press VOL key;
17