Menu Operation

18 Series LCD TV

1.Use the On Screen Display (OSD) menu to adjust the picture’s quality.

2.Multiple languages to choose from.

3.The time range of the menu appearance is 3~60 seconds, which can be adjusted in the General Setting menu.

4.Use the Panel buttons or the Remote Control to operate the OSD MENU.

FUNCTION INTRODUCTION

Using the Channel Setting Menu (For TV Use Only)

1)Press【MENU】and then use【V+】/【V-】to select the Channel Setting menu in TV mode.

2)Use 【P+】/【P-】to select the desired field.

Current Channel

Press 【V+】/【V-】to increase/decrease the channel number.

Channel Label

Press【OK】to enter the edit mode.

Press【P+】/【P-】to select the desired letter, press【V+】 /【V-】for next operation.

Color System

Switch among PAL, NTSC, SECAM, PAL M, PAL N, N4.43, and AUTO modes.

Sound System

Switch among B/G, I, D/K and M systems.

Skip

After Auto Search, there may be some vacant and pseudo

programs received. Skipping the undesired program position can dramatically quicken program selection.

1.When one program is preset to Skip, you will find the program skipped during programs switch by pressing【P+】/【P-】 .

2.Input the channel number directly to watch the program again that has been skipped.

Auto Search

In the Channel Setting Menu, press 【P+】/【P-】to select Auto Search and press 【OK】/【V+】 to start Auto Searching mode.

1.During searching, the sound and color

systems are automatically adjusted and programs are stored.

2.When search is finished, all 236 channels are stored, or 【MENU】is pressed during the search process, the search will automatically stop and go to the channel setting

PAGE 12