Changhong Electric LT2618, LT3218, LT3718, LT4018 Recall, Zoom Mode, Still, PIP/POP/PBP Function

18 Series LCD TV

when it is one minute from SLEEP. Press any button to exit.

Recall

In TV mode, press【RECALL】to view the previous channel or signal source. In the other modes, press【RECALL】to return to the previous signal source

Zoom Mode

Switch among Fill-screen, 4:3, Wide, Cinema and Subtitle modes.

Still

Press【STILL】to freeze or activate the current image.

PIP/POP/PBP Function

Press to enter into or exit from the sub-picture mode. In this mode, you can realize these functions as follows:

1.Press to switch the sub-picture signal source among TV, AV1, AV2, YPbPr, PC and DVI in cycle.

2.Press to switch the sub-picture mode among PIP, PBP and POP.

●Mode 1: To overlap a sub-picture (PIP) in small size wherever you want to locate;

●Mode 2: To place two pictures in the same size side by side. Both main picture and sub-picture (PBP) cover half area of the display screen.

●Mode 3: A main picture covers 12/16 area of the display screen while a sub-picture (POP) covers 1/16.

3.Press to switch between main picture and sub-picture.

4.Press to freeze or continue the current sub-picture.

5.Press to adjust the sub-picture position on display in PIP mode.

Switches of the sub-picture’s channel can be realized by pressing 【CH+】/【CH-】in TV mode.

The sub-picture can enter into TV mode directly by pressing【CH+】/【CH-】in other modes.

Main Pic	TV	AV1	AV2	PC	DVI	YPbPr
Sub Pic
TV	●	●	●	●	●	●
AV1	●	●	●	●	●	●
AV2	●	●	●	●	●	●
PC	●	●	●	●	●
DVI	●	●	●	●	●	●
YPbPr	●	●	●		●	●

Note: All buttons mentioned in this operation are on the remote control, signs of “●” mean that both pictures can be displayed at the same time and the blanks mean that they can not be displayed at the same time.

PAGE 19