Function Introduction

MENU OPERATION

1.Use the On Screen Display menu to set and adjust functions

2.Use 【CH+】/【CH-】to select the desired menu after pressing 【MENU】, then press 【Vol+】【/ OK】to enter the next submenu; Use 【Vol +】【/ Vol -】to select the menu options and return to the precious menu by pressing 【MENU】again. The menu will auto

disappear without any operation within 10 seconds.

In TV、AV、S-VIDEO、YPbPr and PC modes ⅠPicture

●Brightness

To adjust the picture’s brightness

●Contrast

To adjust the picture’s contrast.

●Sharpness

To adjust the picture’s definition.

●Colour

To adjust the picture’s color.

●Tint

To adjust the picture’s tint.

Note: Picture menu options in other signal sources:

AV/S-VIDEO: the same as in TV mode

YPbPr/PC: only two options of Brightness and Contrast

ⅡSound

●Volume

To increase or decrease the volume.

●Balance

To balance the volume between the left and right speakers.

●Woofer

To turn on/off the woofer.

●Spatial

To turn on/off the surround

●Equalizer (submenu)

Use 【 OK】/【 Vol+】 to enter the Equalizer

(submenu), you can increase or decrease the value of the sound output in every frequency band which are preferred

Note: The Sound menu options are the same in TV

PAGE 10