1～12（PM）.When“Hour”turns to
●Channel
Select the Channel in Air from 2 to 69 or Cable from 1 to 125 by pressing【Vol+】【/
1.When TV is on, it turns directly to the preset channel if the preset Time is on; When TV is in standby mode, it firstly turns on and then goes to the preset channel If the preset Time is on.
2.When the TV is on , if the value of On Time and Off Time are the same, only Off Time is valid; When the TV is off, if the value of On Time and Off Time are the same, only On Time is valid,
3.Restart the TV after shutting off the main power, all settings are to be initialized; Turn off the TV using the remote control, all settings are to be saved.
Note: Only in standby mode can this TV be turned on automatically. The Clock menu in other signal sources is the same to that in TV mode.
ⅥPC Setup
●H Position
To adjust picture’s start horizontally.
●V Position
To adjust picture’s start vertically.
●Clock
To adjust pictures’ sampling clock .
●Phase
To adjust pictures’ sampling phase
●Colour Temp
Four modes of Warm、Normal、Cool And User to choose with
●Auto Adjust
To adjust the picture’s start 、clock、phase and color temper to the appropriate value (invalid in DOS mode).
Note: The PC Setup menu is only available in the PC signal source.
OTHER FUNCTIONS
●Volume Control
1.
2.Press【MUTE】on the remote control to turn On/Off the MUTE mode. In Mute mode, a sign of“MUTE” in red will appear on the
PAGE 14